sw war3 konf

Switch>enable Switch#configure terminal

Enter configuration commands, one per linę. End with CNTL/Z

Switch(config)#ip routing

Switch(config)#vlan 10

Switch(config-vlan)#exit

Switch(config)#vlan 20

Switch(config-vlan)#exit

Switch(config)tinteface vlan 10

% Invalid input detected at ' ■**' marker.

Switch(config)#interface vlan 10 Switch(config-if)#

%LINK-S-CHANGED: Interface Vlanl0, changed State to up

Switch(config-if)#ip address 192.163.1.1 255.2SS.255.0

Switch(config-if)#exit

Switch(config)#interface vlan 20

Switch(config-if)#

%LINK-5-CHANGED: Interface Vlan20, changed State to up

Switch(config-if)#ip address 192.163.2.1 255.255.255.0 Switch(config-if)#exit Switch(config)trouter ospf 1

Switch(config-router)#network 192.163.1.0 0.0.0.255 area 0 Switch(config-router)#network 192.163.2.0 0.0.0.255 area 0 Switch(config-router)#exit Switch(config)#end