Refit
1. Position oil cooler.
2. Fit bolts securing oil cooler to cylinder błock and tighten:
M8bolt to 25 Nm.
M10 bolts to 45 Nm.
3. Clean oil cooler pipes and unions. fit NEW 'O' rings to pipes.
4. Connect pipes to oil cooler and tighten unions to 25 Nm.
5. Tighten oil pipę clamp bolt.
6. Connect coolant hose to thermostat housing and secure clip.
7. Position top hose and water pump hose to oil cooler and secure elips.
8. Top up engine oil. See MAINTENANCE.
9. Refill cooling system. See COOLING SYSTEM - 'L' SERIES, Adjustments.
10. Fit acoustic cover. See this section.
11. Connect battery earth lead.
1. Remove both front drive shafts. See DRIVE SHAFTS, Repairs.
Models fitted with air conditioning
2. Disconnect multiplug from compressor.
3. Remove 4 bolts securing compressor to water pump housing.
4. Release compressor from dowels and tie aside.
41