>) Błock parameters:
SalientPole Synchronous Machinę (mask)-
The inputsignal Tm represents the mechanical torque, in Nm. The vectorized output signal of width 3 contains
- the rotational speed wm, in rad/s
- the mechanical rotor position th, in rad.
AJI parameters and electrical guantities are referred to the stator side.
-Parameters
Name:
(SM SalientPole |
] m | ||
Stator resistance Rs: |
Dam per leakage inductance pjkd'Ukq']: | ||
[3e-3 |
J |
|[5e-4 1e-3] |
J |
Stator leakage inductance Us: |
Inertia J: | ||
[3e-4 |
J |
|4e6 |
J |
Unsat. magn. inductance (LrndO LmqO): |
Friction coefficient F: | ||
|[3e-3 1e-3] |
J |
F |
J |
Saturated magn. inductance Lmdsat: |
N urn ber of pole pairs p: | ||
|.6e-3 |
J |
[i |
J |
Magn. flux at sat. transition PsiT: |
Initial rotor speed wnO: | ||
V2 |
J |
^*pi*50/16 |
J |
Tightness of sat. transition fT: |
Initial rotor position thmO: | ||
F |
J |
F |
J |
Field resistance Rf: |
Initial stator currents psaO isbOj: | ||
|Se-4 |
J |
|pó) |
J |
Field leakage inductance Uf: |
Initial field currentifO': | ||
[3e-4 |
J |
F |
J |
Dam per resistance [Rkd'Rkq'j: |
Initial stator flux psisdO PsisqO]: | ||
|(1e-2 2e-2] |
J |
|(0 0] |
J |
OK Cancel Help £pply