MR293R19025 1

MR293R19025 1



Unpicking


COMPOSITION OF PART AS SUPPLIED BY PARTS DEPARTMENT

Panel only

The two covers (1) are to be ordered separately.



JOINT WITH REAR END PANEL EXTENSlON



pj~| JOINT WITH REAR SlfPPORT PANEL See section 44-A-l

0

ThicKneases of panele (in nun)

Rear end panel cross member 0.67 Rear end panel e>:tension 0.97 Rear end panel 0,67

5 spot welds welding

- 1 spot weld joining 3 thicknesses Special feature

After welding and betore applylng the crimped joint protection, fit the pressed Steel covers (1). clipping them on to the studs.



Wyszukiwarka

Podobne podstrony:
MR293R19022 1 [T] JOINT WITH REAR PARCEL SHELF COMPOSITION OF part as SUPPLIED BY PARTS DEPARTMENT
MR293R19029 1 COMPOSITION OF PART AS SUPPLIED BY PARTS DEPARTMENT Special pointę applicable to remo
MR293R190?2 1 COMPOSITION OF COMPONENT AS SUPPLIED BY PARTS DEPARTMENT - Basic part [Tj CONNFCTTON B
MR293R19035 1 COMPOSITION OF COMPONENT AS SUPPLIED BY PARTS DEPARTMENT -    Franiu.
MR293R19033 1 Thię part w*, l] nave to be repiaceu, togcthor wi th i.ts sr.if ffin^r. COMPOSTTTON O
44192 MR293R19002 1 Cutti ng/Unpicking COHPOSITION OF COHPONENT AS SUFPLIED BY PARTS DEPARTMENT - B
MR293R19024 1 COM PO SITION or part as SUPPLIED BY PARTS DEPARTMENT JOINT WITH SIDE PANEL

więcej podobnych podstron