MR293R19041 1
This operation is to be carried out on tha body jig bench. See sub-section 40 of the basie manuał.
COMPOSITION OF PART AS SIJPPLIED BY PARTS DEPARTMENT
Assembly comprising:
- wing panel,
- outer wheel arch assembly,
- inner wheel arch assembly,
- quarter panel yert. stretcher,
- ąuarter panel lining assembly,
- side channel assembly,
- rear light support panel,
- rear end panel extension,
- side cross panel assembly,
- seat back securing stiffener,
- jack support (on RH side only).
JOINT WITH SIDE MEMBER COVER PANEL
Thicknesses of panels (in mm)
Unpicking
3 spot welds
Welding
- one 2Gmm MAG fillet “ two 20mm MAG fillets
Wyszukiwarka
Podobne podstrony:
MR293R19021 1 The wing pan*l musu be renoved beforc. this operćit.ion can be carried out. COMPOSITI
MR293R19072 1 The opftratiojis doscribed below sr« to be carri M out on both the right and left ban
MR293R19014 1 This opcration ia In be earricd out aft.er rcmoviny the ioof. compositiun or thc part
of Subject Sections, a definite decision in this rcspect having to be reached later on by the Intern
87308 MR293R19003 1 The front door pillar and wing panel have to be remoyod before this operat
MR293R19000 1 The door pillar apper stiffener muSt be rcmoved before this operation can be car
48935 MR293R19038 1 This operat:i on is udóltionai to t.hose mvolved ln rop.Loc j.ng tfce
MR293R19022 1 The wing panel ttiust be removed bofore thift operation can be ćarried out. GOKPOSITI
więcej podobnych podstron