70874 MR293R19067 1

A reroovable unit oan be mounted, witbout any modifications being necessary, in the radio housing, provided    its external    dioiensions are less than    162 x    53    ram    and it ia

not deeper than 165 mm.    The raounting    edge should not be longer    than    190    mm    or higher

than 62 urn.

MOUNTING

Connect a special harness (part no. 77 01 419 040 for a radio with two speakera; part no. 77 01 420 375 for a radio with four speakera; part no. 77 01 421 556 for the Pioneer radio) to the red MIC eonnector on the righthand side in the radio houaing.

Screw In the iocking ptn, supplied with the radio, at the rear of the removable unit, uaing the screw found in the unit assembły fittings saohet.

Connect the harness and aerial cable to the unit.

Fit the unit in place,    guiding the    harness to the righthand    3ide    of    the    unit and

towards the baek of the    radio housing, and routlng the aerial    cable    along    the lower

ridge at the back of the unit, pas3ing your hand through the upper cut-out section in the unit.

Push the unit into its hou3ir,g and seoure it in place.

Fit the radio in aceordance with the instructions supplied with the remoeable unit.