53506 MR293R19017 1

53506 MR293R19017 1



[~6~| JOINT WI1H REAR END PANEL EXTEN5IUN

Thicknesses of panej (in rnm)

Wing panel    0.67

Rear end panel extension    0.97

Onp jcking

NDTE ; One Df the spot welds is under the rear end panel cross member (see welding) lf this cross member is not to be removed a speeial form uf cut is to be ni3de in the panel.



4 or 5 spot. welds depending on the method



A - Inciuding removing the rear end pan-el^-eęose member



One 2U mm MAG fi 1let B - Without removing the cross member



Welding


A - Inciuding removing the reur end panel rrnss member

93 II1S


2> (3>



3 - Without remuving the cross member




Wyszukiwarka

Podobne podstrony:
MR293R19017 1 [~6~
MR293R19017 1 [~6~
MR293R19043 1 3 JOINT WITH BODY SILL Thicknesses of panels (in mm) wing panel Body sili Outer
32045 MR293R19016 1 JOINT WITH REAR LIGHT 5UPP0RT PANEL [4~
MR293R19018 1 Welding -[7]JOINT WITH THE REAR FLOOR SECTION Thicknesses of panels (in mm) -  &
87617 MR293R19031 1 JOINT WITH SIDE CROSS PANEL Welding - 4 spot walds joining three thicknesses Th
MR293R19014 1 CONNECTION WITH THE BODY SILL AND CENTRE DOOJR PILLAR Thicknesa of metal (in mm) Wi n
MR293R19022 1 [T] JOINT WITH REAR PARCEL SHELF COMPOSITION OF part as SUPPLIED BY PARTS DEPARTMENT
MR293R19019 1 COMNECTIOH WITH THE REAR LIGHT SUPPORT PANEL Cutting/UnpLcking CONNECTION WITH THE RE

więcej podobnych podstron