60169 Suzuki RM2509
FRONT FORK AND STEERING 15-13
♦ Clamp the axle holder @ with a vise. Protect the axle holder with a rag when using a vise.
* Loosen the center bolt ® completely with a 21 min socket wrench.
A WARNING
Clamping the axle holder too tight can damage it which will affect riding stability.
Do not clamp the axle holder too tight.
Compress the outer tubę by hands and install the conrod holder (special tool) between the axle holder bottom ® and locknut
09910-20115: Conrod holder
Hołd the locknut with a wrench and remove.the center'bolt.
C-;:-7
IKSHI
Wyszukiwarka
Podobne podstrony:
64911 Suzuki RM2503 FRONT FORK AND STEERING 15-27 ♦ Fit the upper and lower outer races with the sp
78208 Suzuki RM2509 FRONT FORK AND STEERING 15-23 ♦ Tighten the center bolt to the specified torque
Suzuki RM2501 FRONT FORK AND STEERING 15-15INNERTUBE ♦ Separate the inner tubę out of the outer tub
Suzuki RM2505 FRONT FORK AND STEERING 15-19 ♦ Install the new oil seal ® with the special tool unti
suzuki rm25059 FRONT FORK AND STEERING 15-13 • Clamp the axle holder (D with a vi
Suzuki RM2503 FRONT FORK AND STEERING 15-7SPRING CHANGE * Remove the front forks.
41125 Suzuki RM2507 FRONT FORK AND STEERING 15-11FRONT FORKREMOVAL • Place a błoc
44243 Suzuki RM2501 FRONT FORK AND STEERING 15-25STEERINGREMOVAL • Remove the fro
suzuki rm25047 FRONT FORK AND STEERING 15-1FRONT FORK AND STEERING -CONTENTS- CONSTRUCTION
suzuki rm25049 FRONT FORK AND STEERING 15-3FRONT FORKTUNING The front fork compression and rebound
suzuki rm25051 FRONT FORK AND STEERING 15-5OIL CHANGE (Only for outer tubę oil cham-ber) • &n
suzuki rm25053 FRONT FORK AND STEERING 15-7 FRONT FORK AND STEERING 15-7 he center bolt. mbly and f
więcej podobnych podstron