FIGURĘ A
Materials:
12 — 3mm Plated Beads, Gold (415-21) or Silver (415-23)
24 — 4mm Plated Beads, Gold (415-25) or Silver (415-27)
8 — 8mm Plated Beads, Gold (415-37) or Silver (415-39)
32 — 6mm Faceted Beads, Transparent Turquoise (376-75) or Color of Choice 28 ga. Barę Spool Wire, Gold (658-93) or Silver (658-97)
Pliers
Wirecutters Ruler or YardsticK
1. String 8 — 8mm beads onto 36” piece of wire, leaving 3” taił at one end. Twist wires together so that beads form a tight circle.
2. Working with long wire, 4 add 1 — 4mm, 1 — faceted, 1 — 4mm. 1 — faceted, 1 — 4mm, skip next 8mm of circle, run wire through next 8mm (Figurę A); repeat from 4 three morę times.
3. Reversing direction, run wire up through next 4mm, 4 add 1 faceted, 1 — 4mm, 1 faceted. run wire through next 4mm, faceted. 4mm (Figurę B); repeat from 4 three morę times.
4. Continuing in same direction, run wire up through faceted. 4mm, faceted, and top 4mm, 4 add 1 — faceted, 1 — 4mm, 1 — faceted, run wire through next top 4mm (Figurę C); repeat from 4 seven morę times.
FIGURĘ C
5. Add 12 — 3mm, run wire through same 4mm from opposite side. Run wire back down through two faceted, 4mm and 8mm of circle around to 3” taił; twist wires together tightly and trim excess.
Materials:
144 — 3mm Pearls, White (416-11)
52 — 4mm Pearls. White (416-13)
135 - 5mm Pearls. White (416-15)
36 — 3 x 6mm Peari Oats, White (416*33)
8” — 3/8” wide Velvet Ribbon. Red (506-31) Curly Angel Hair (869-43)
Panorama Ornaments — Deer (917-31) and Tree (916 49)
28 ga. Barę Spool Wire, Silver (658-97)
Cardboard
Aluminum Foil
Scissors
Pliers
Wirecutters Ruler or Yardstick
Pearls listed for this ornament are those shown in photo. This ornament can also be madę with gold or silver plated beads in cor-responding sizes.
Cut two 7/8” diameter circles from cardboard and cover each with foil. Glue discs back to back. Let dry.
Row 1: (Back) Add 18 — 5mm pearls to one end of 2 yd. piece of wire and twist wires to form circle. Trim short end of wire close to pearls. Position circle on edge of foil disc. Be surę to keep pearls on edge of disc while working Rows 2-3.
Row 2: 4 Add 1 oat, 1 — 3mm pearl, 1 oat, skip next 5mm pearl, run wire through next 5mm pearl (Figurę A); repeat from 4 8 morę
Row 3: Run wire back up through next oat and 3mm pearl. 4 add 1 — 3mm pearl. run wire through next 3mm pearl (Figurę B);
FIGURĘ B
Row 3
repeat from 4 8 morę times. Puli wire tight.
Run wire up through next oat and 5mm pearl; repeat Rows 2 and 3 to complete frame to hołd disc in place.
Row 4: Run wire through next oat and 5mm pearl, 4 add 5 — 5mm pearls, skip next 5mm pearl, run wire through next 5mm pearl (Figurę C); repeat from 4 8 morę times to make nine 5-pearl loops.
Row 5: Run wire up through first 3 pearls of 5-pearl loop, 4 add 3 — 5mm pearls, run wire through top (third pearl) of next 5-pearl loop (Figurę D); repeat from 4 8 morę times. Puli
Row 6: Run wire through next 2 — 5mm pearls (Figurę E), 4 add 5 — 5mm pearls, run wire through top (second) 5mm pearl of next 3-pearl loop (Figurę E); repeat from 4 8 morę times to make nine 3-pearl loops.
Row 7: Run wire through first 3 — 5mm pearls of next 5-pearl loop, add 3 — 4mm pearls, run wire through top (third) 5mm pearl in next 5-pearl loop (Figurę F); repeat from 4 8 morę times. Puli wire tight.
FIGURĘ F
Row 8: (Front scallops) 4 Add 5 — 3mm pearls. skip next 3 — 4mm pearls. run wire through next 5mm pearl (Figurę G); repeat from 4 8 morę times to make nine scallops.
Row 9: (Back scallops) Run wire back to top (second) 5mm pearl of 3-pearl loop in Row 5 (Figurę H), 4 add 7 — 3mm pearls. run wire through top (third) 5mm pearl of next 5-pearl loop (Figurę H); repeat from 4 8 morę times to make nine scallops.
Row 9
Row 10: (Hanger) Add 25 — 4mm pearls, skip next two scallops, twist wire around Row 5 wire to secure. Clip wire close to pearls.
Tie ribbon in a bow and glue to top of ornament under hanger. Glue a smali piece of Angel Hair to inside bottom of ornament, and glue deer and tree in place.
3