53

53



SERVICE DATA AND SPECIFICATIONS (S.D.S.)

_Engine Maintenance_

iNSPECTION AND ADJUSTMENT

Basic mechanical system

Valve clearance (Hot)

mm (in)

Intake

0.25 (0.010)

Exhaust

0.30 (0.012)

Drive belt deflection    —    Unit: mm (in)

Used belt deflection

Set deflection of new belt

.f>

Limit

Adjust

deflection

Alternator

19.0 (0.748)

13.5- 16.0 (0.531 -0.630)

12.5- 14.0 (0.492 - 0.551)

Applied pushing force: 98 N (10 kg, 22 Ib)

Radiator cap relief pressure

kPa (kg/cmJ, psi)

88 (0.9, 13)

Cooling system leakage testing pressure kPa (kg/cm2, psi)

157 (1.6, 23)

/

—*

.*3

T— %

.7

r i

;■?

Ignition and fuel system

Spark pług

Canada

Type Standard

BPR5ES

Hot

BPR4ES

Cold

• BPR6ES

Gap mm (in)

0.8 - 0.9 (0.031 -0.035)

Distributor Air gap

Close but not touching

- -

MfT

A/T

(in "D" positior

Ignition timing/idle speed degree/rpm

2±2° A.T.D.C7 750±50

2i2° 8.T.D.C. 700±50

"CO"% at idle speed

2.0±1.0

TIGHTENING TORQUE

Item

N-m

kg-m

ft-lb

Alternator securing bolt

22-29

2.2 - 3.0

16-22

Alternator to adjust bar bolt

9.1 -11.8

0.93 -1.2

6.7 -8.7

Valve rocker adjusting screw lock nut

11-15

1.1 -1.5

8-11

Oil pan drain pług

35-47

3.6 - 4.8

26-35

Spark plugs

20-29

2.0 - 3.0

14-22

Crank pulley bolt

69-88

7.0 - 9.0

51 -65

Tensioner lock nut

15-17

1.5 -1.7

11-12



101 1Cl381t«l jłPSfO —ii

8rMAM2    ^iCMtsiwjo rtroorra


- ns ■ -.i’.'


9


Wyszukiwarka

Podobne podstrony:
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)VALVE Unit: mm (in)Valve s
SERVICE DATA AND SPECIFICATIONS (S.D.S.)__Inspection and Adjustment (Cont d)- Main journal inner
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
SERVICE DATA AND SPECIFICATIONS (S.D.S.) TIGHTENING TORQUE_Tightening Torque-Engine internal
SERVICE DATA AND SPECIFICATIONS (S.D.S.)-Chassis and Body Maintenance--(Cont d) TIGHTEIMING
SERVICE DATA AND SPECIFICATIONS (S.D.S.) TIGHTENING TOROUEGENERAL SPECIFICATIONS Suspension
SERVICE DATA AND SPECIFICATIONS (S.D.S.)-iiispeciion and Aujusimem(Cont d) REAR BRAKE Unit: mm
SERVICE DATA AND SPECIFICATIONS (S.D.S.) Tightening TorgueGeneral Specifications Steering gear
SERVICE DATA AND SPECIFICATIONS (S.D.S.) General SpecificatlonsInspection and Adjustment Cylinder
IGNITION SYSTEM —Distributor—-Service Data and Specifications
SERVICE DATA AND SPECIFICATIONS (S.D.S.)General Specifications__Specifications and Adjustment_ Vehic
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Tightening Torgue__ Item N-m kg-m ft-lb Wheel
89 TransAlp Manual General Specifications Service 3 7 MAINTENANCE<f% ĄVALVE CLEARANCE NOTĘ • insp
89 TransAlp Manual General Specifications Service 3 9 MAINTENANCE MAINTENANCE n J) <4 "i «»C
Valve seatSERVICE DATA AND SPECIFICATIONS (S.D.S.)_Inspection and Adjustment (Cont d)_ INTAKE 1.5
fSERVICE DATA AND SPECIFICATIONS (S.D.S.)_Chassis and Body Maintenance_ BrakeINSPECTION AND
suzuki rm25014 19-8 SERVICE DATA TIGHTENING TORQUE CHART For other bolts and nuts not listed in the
BSA 201952 20Sales 20Brochure 2011 GENERAL SPECIFICATION ENGINE. Air cooted with cost iron cylindor
ENGINE MAINTENANCE (Cont d)Before Engine REPLACING P.C.V. FILTER Remove air cleaner cover, and repla

więcej podobnych podstron