67
4
Replacement
Replace valve or valve guide.
1. Heat cylinder head to 150 to 160°C (302 to 320°F) and drive out valve guide with a press [under a 20 kN (2t, 2.2 US ton, 2.0 Imp ton) pressure] or hammer, and suitable tool.
2. Ream cylinder head valve guide hole.
3. Heat cylinder head to 150 to 160°C (302 to 320° F) and press service valve guide into cylinder head.
12.7 -13.3 mm (0.500 - 0.524 in)
S6M008A
SEM542
4. Ream valve guide.
Finished size:
7.005 - 7.020 mm (0.2758 - 0.2764 in)
SEM647
Wyszukiwarka
Podobne podstrony:
89 TransAlp Manual Cylinder Head Valve 9 Valve guide reamer JCYLINDER HEAD/VALVE Measure and record
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE TOOLS: Valve guide drłver IN: &n
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Use a 60 degree cutter to remove the b
*ENGINE MAINTENANCEBefore Engine Starts (Cont d) REPLACING TIMING BELT Removal 1.
46709 WarMachine124 124 Replacinga Legend A fully illustrated guide to Modern Combat Pistols
WarMachine124 124 Replacinga Legend A fully illustrated guide to Modern Combat Pistols
image032 (4) % Choice of Flash Point, EvaporatM>n, or Solubibty Calculation II you ntcrd to port:
The sideband whtch remains is then amplified by one or morę stages of linear amplification to i
Błock coding: When the błock coding is used, one or several check bits are added to the information
K£COMMENDATIONS Cont’d. Regarding the articles of the Constitution Act specifically referred to in t
Kavicsfestés I 34 Palii t the open spaces Use a medium or large brush with black paint to darken t
Kavicsfestés I 35 Add spots Use the same cotton swab (or a smali brush) and yellow paint to add du
IH 2 Tides, Currents IHTide Tables30 Tabular statement of semi-diurnal or diurnal tides Tidal Leyels
image025 tai Choice of Flash Point, Evaporation, or Solubility Calculation If you intend to print re
więcej podobnych podstron