74

M/T model:

FU 39 • 49

(4.0 -6.0.29 361

SEM924A

A/T model:

FU 39 - 49 (4.0 - 5.0. 29 - 36)

FU 31-42 13.2-4.3, 23-31)

FD 41 • 49

(4.2 5.0, 30 36)

^z-[qj i6 - 21

(1 6 2.1. 12- 15)

FU 31 42 (3.2 4

c.

FU 39 • 49 (4.0 5.0. 29

¹ #ą- ' V" m i .!

WARNING:

a.    Set vehicle on a fiat and solid place.

b.    Set chocks at front and rear of rear wheels.

Before removing front axle from transaxle unit, place safety stands under designated front supporting points. Refer to Gl section for lifting points and towing.

Be surę to hoist engine and trans-axle in a safe manner.

Do not remove engine until exhaust system has completely cooled off. Otherwise, you may burn yourself and/or fire may break out in the fuel linę.

For safety during subsequent steps, the tension of wires should be slackened against the engine.

CAUTION:

a.    In removing drive shaft, be careful not to damage grease seal of trans-axle side.

b.    When installing drive shaft in trans-axle, use proper Tool (KV38106300 for M/T, KV38105500 for A/T).

c.    In lifting engine, be careful not to hit it against adjacent parts, especially against brake tubę and brake master cylinder.

d.    When lifting engine, attach two engine slingers 10005-08BOO to intake and exhaust manifolds studs.

F3 • N-m (kg-rn, ft-lb)