CHU0411W026

Confirm customer's complaint

Perform latera! runout inspection. (Referto Lateral Runout Inspection.)

Less than 0.05 mm {0.002 in}

Occurs

Does not _oęęur

Morę than 0.05 mm {0.002 in} Less than 0.05 mm

_{0.002 in}

Verify whether brake judder occurs or not.

Perform thickness variation inspection (Refer to the following.)

Morę than 0.015 mm {0.00059 in}-

Remove disc piąte and reinstall in other phase. Perform lateral runout inspection again._

Less than 0.015 mm {0.00059 in}

Confirm customer's complaint again.

Work is completed.

Secure the disc piąte by tightening all hub nuts to the same torque, and measure lateral runout.

On-the-car type lathe (less than 0.015 mm {0.00059 in}).

Work is completed.

Morę than 0.05 mm {0.002 in)

Machinę the disc piąte using on-the-car type lathe.

CHuauiwooe