Piotr Boniewicz
52 3408572 ^ piotr.boniewicz@utp.edu.pl gt|
Primary laboratory equipment:
• GTEM-1000 chamber Teseą (mcodmum EUT dimen-sions: 0.74x0.74x0.66 m)
• ESCI measuring receiver (up to 3 GHz) - compliance with CISPR-16-1-1
• Disturbance genercrtor (up to 3.2 GHz)
• Measuring antennas up to 3 GHz
• Artificial three-phase power network (LISN type V, CISPR-16-1-2, 9 kHz... 30 MHz, 4x25 A, 4x50A for 2 min.)
• Vector network analyzer (4 ports up to 4 GHz)
• Spectrum analyzer up to 3 GHz
• EFT generator / Burst / Surge 3060 + CDN set (1-and 3-phase, capacitive buckie)
• Climate chamber (adjustable temperaturę up to -40 deg C and controlled humidity)
• Arbitrary generator (AD, DC, 5 kVA, 1-phase)
• Thermal imaging camera
• Portable power ąuality analyzers
RADIATED AND CONDUCTED EMIS-SION MEASUREMENTS, RADIATED AND CONDUCTED SINUSOIDAL DIS-TURBANCES SUSCEPTIBILITY TESINC
• Conducted disturbances susceptibility testing (with a set of CDN for standard mains and signal ports)
• Radiated emissions measurements in the GTEM chamber
• Radiation emission measurements (OATS and 'in situ' tests at the place where the device is in-stalled)
• Conducted emission measurements (with 3-phase LISN network)
• Radiated disturbances susceptibility testing in the GTEM chamber
IMMUNITY EVALUATING WHEN SUB-JECTED TO PULSE SICNALS
ESD: IEC / EN 61000-4-2 (up to 16.5 kV)
• EFT / Burst: IEC61000-4-4
• Surge: IEC 61000-4-5
• Dynamie changes in the PQT supply voltage:
• Fluctuations and voltage drops in AC lines ac-cording to IEC 61000-4-11
• Fluctuations and voltage decays in DC lines ac-cording to 61000-4-29
• Immunity to mains voltage according to IEC / EN 61000-4-8: maximum field strength 40 A/m
• Immunity to pulsed magnetic field according to IEC / EN 61000-4-9: maximum field strength 1200 A/m
POWER SUPPLY TESTS
• Analysis of 1-phase devices with mains voltage and reduced AC voltage in the following subranges:
• 0..135 V AC (cont. current: 37 A), up up to 150 V AC with the 5 kVA power limit
• 0..270 V AC (cont. current: 18.5 A), up to 300 V AC with the 5 kVA power limit
• Analysis of devices powered with constant volt-age inthe following ranges:
• 0..200 V DC (continuous load current: 26 A) with a 3.5 kW power limit
• 0..400 V DC (continuous load current: 13 A) with a 3.5 kW power limit
• Carrying out tests of compliance with the reąuire-ments of standards:
• Current harmonie emission tests (IEC 61000-3-2)
• Measuring of voltage changes, fluctuations and flicker public low-voltage supply systems (IEC 61000-3-3)
• Immunity testing to harmonie and interharmonic inthe power port (IEC 61000-4-13)
• Immunity testing to voltage fluctuations (IEC 61000-4-14)
• Immunity testing to the ripple on DC power port (IEC 61000-4-17)
■ Immunity testing to mains freąuency changes (IEC 61000-4-28)
• Immunity testing to voltage sags, short interrup-tions and voltage changes in a DC power port (IEC 61000-4-29)
CLIMATE TESTS OF ELECTRICAL DEVICES
• Climate tests covering changes in temperaturę and humidity, without executing thermal stress (approx. max. EUT dimensions: 50x50x50 cm)
ELECTRICAL AND MAGNETIC FIELDS DISTRIBUTION MEASURING AND ANALYSIS
• test of electric and magnetic field strengths for Iow freąuencies - in the near field (workplaces, areas intended for residential development)
• EM field distribution test for radio freąuencies up to 3 GHz
Uniwersytet Technologiczno-Przyrodniczy im. J. i J. Śniadeckich w Bydgoszczy