[usbO - Menedżer plików]
[X |
01:56 |
[fiPt |
'jpfr Programy (5j> IX axis.ngc - AXIS 2.7.0 na ... UJ [Edytor obrazów GIMP]
axis.ngc - AXIS 2.7.0 na mm cnc
Plik Maszyna Widok Pomoc
©|@[ ED ^
Ręczna kontrola [F3] | MDI [F5]
Oś:
r x (* y
r z
_JjtJ|Ciągły ▼]
Bazuj oś | Ustaw Offset
Wrzeciono: mr Stop "fil
Podgląd i DRO
X: |
-137.064 |
DTG |
X |
0.000 |
Y: |
-816.272 |
DTG |
Y |
0.000 |
Z : |
91.313 |
DTG |
Z |
0.000 |
G54 X> |
3.619 |
G92 |
X |
0.000 |
G5>^Y: |
8.76T7 |
G92 |
Y |
0.000 |
■^54 Z: G54 R: |
-0.00D 0 .ook |
G92 |
Z |
0.000 |
TLO X TLO Y TLO Z
0.0
Skala prędkości: 100 %
Rapid Override: 100 %
Skala prędkości wrzeciona: 100 %
Prędkość posuwu: 4654 mm/min
Maksymalna prędkość: 48000 mm/min
( AXIS "splash g-code" Not intended for actual milling )
( To run this codę anyway you might have to Touch Off the Z axis)
( depending on your setup. As if you had some materiał in your mili... )
( Hint jog the Z axis down a bit then touch off )
( Also press the Toggle Skip Lines with "/" to see that part )
( If the program is too big or smali for your machinę, change the scalę below ) ( LinuxCNC 19/1/2012 2:13:51 PM )
#<depth>=2.0
#<scale>=1.0
RTAPI: ERROR: Unexpected realtime delay on task 1
This Message will only display once per session. Run the Latency Test and resolve before continuing.
Qxi