50151052

50151052



Routerl

Physical | Config CLI |

IOS Command Linę Interface

Rlłshow ip protocols

Routing Protocol is

Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgomg updates Default networks accepted from incoming updates EIGRP metric weight Xl=i, X2=0, K3=l, X4=0, K5=0 EIGRP maximum hopcount 100 EIGRP maximum metric variar.ce 1 Redistributing: eigrp 100

Automatic network summarization is in effect Automatic address summanzation:

Maximum path: 4

Routing Information Sources:


Distance

90

90


Gateway

172.16.10.2

10.1.1.2


Last Update

184753

213482


Distance: internal 90 external 170

Rl#

Copy    Pastę



Wyszukiwarka

Podobne podstrony:
jnjxj Routerl Physical
f R1 Pł^^.cal
strona startowa IOS IOS Command Linę Interface Cisco IOS Software, C2960 Software (C2960-LANBASZ-M),
- Routerl Physical
Router 4 Physical ConfigCLIIOS Command Linę Interface 3ad Rcuterłccpy tftp rur.r.ir.g-conf ig
Routerl ---——-=7- Physical Config CLIIOS Command Linę Interface Roucer> Router>en
Router2 Physical Config CUIOS Command Linę Interface Router>en Router#conf t Enter configuration
Router4 Physical Config CUIOS Command Linę Interface Roucer>en Roucertconf c Encer configuracion
Routerl Physical Config CLIIOS Command Linę Interface %5YS-5-CONFIG_I; Configured from ccnsole by co
8? RouterO Physical Config CLIIOS Command Linę Interface interface FastZthernet4/0 no ip
sw1 Physical Config CLIIOS Command Linę Interface JII14-3U Bpa-VLAN0010 Spanning tree enabled protoc
sw2 Physical Config CLIIOS Command Linę Interface JH.ŁI—311
sw3 Physical Config CLIIOS Command Linę Interface SW3$sh
Router>en Router#conf t Enter configuration commands, one per linę. End with CNTL/Z. Router (conf
Router>en Router#conf t Enter configuration commands, one per linę. End with CNTL/Z. Router (conf

więcej podobnych podstron