3109102878

3109102878



POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING

1 (1 )/2013, 7-16

Czasopismo naukowo-techniczne - Scientific-Technical Journal

Jan BORKOVEC. Jindfich PETRUŚKA

EVALUATION OF FOUR FRACTURE CRITERIA IN COMPRESSIYE LOADING CONDITIONS

Summary: Suitability of various fracture criteria in the case of compressive loading conditions are perfonned in this work. Four fracture criteria were imestigated: constant fracture strain, EWK. Oh and Xue-Wierzbicki. Tlie first two are already implemented in PamCrash v2005.1. while the latter two had to be programmed as a user materiał. These models were applied to the technological process of boll-head trimming. Tlie digital simulation was compared with the experimental results. Constant strain fracture had insufficient results because calibration conditions were not consistent with the simulation. Xue-Wierzbicki is aversatile criterion. but it is not suitable for compressive loading conditions either. Good conformity was observed with EWK and Oh criteria.

Kcy w ords: ductile fracture. element elimination. explicit FE simulation

1. INTRODUCTION

Digital simulation of the fracture process is an intensively studied field with applications in automotive, aerospace and the metallurgical industry. Although a great number of fracture criteria were developed, nonę of them is universal. The aim of this work is to investigate selected criteria in case of compressive loading conditions. This type of loading is typical for technological operations, which uses materiał failure as a production techniąue (machining, drilling and trimming). In these conditions, many failure criteria have insufficient results and the research has to be done to achieve reliability, which allows using digital simulation in industrial practice.

Fig. 1. Trimming matrixOK16 Rys. 1. Matryca okrawająca OK 16

doc. Jan BORKOVEC, prof. Jindfich PETRUŚKA, Brno University of Technology. Institute of Solid Mechanics, Mechatronics and Biomechanic, Technicka 2896/2,

616 69 Brno, Czech Republic, e-mail: jan.borkovec@centrum.cz



Wyszukiwarka

Podobne podstrony:
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 2(1)/2013, 15-25 Czasopismo
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 2(1 )/2013, 5-13Czasopismo
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 1 (1)/2013, 17-26 Czasopism
POSTĘPY w INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 3(2)/2014, 13-20 Czasopismo
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING3(2)/2014, 5-12Czasopismo
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 6(3)/2015, 13-22 Czasopismo
POSTĘPY W INŻYNIERII MECHANICZNEJ DEVELOPMENTS IN MECHANICAL ENGINEERING 6(3)/2015, 5-12 Czasopismo
PRECEDENT D-LAB Founded by Amy Smith, Senior Lecturer in Mechanical Engineering, D-Lab has developed
Master of Science in Mechanical Engineering specialization: Product EngineeringPoznan University of
MSc IN MECHANICAL ENGINEERING specialization: International Design Engir to beobtained Master of
Lecture Notes in Mechanical Engineering Sergej Hloch Dagmar Klichova Grzegorz M. Królczyk 
Engineering Accreditation Commission o ABET W roku 2017 Wydział Inżynierii Mechanicznej i Robotyki
1 MIEJSCE I ZADANIA MECHANIKI GRUNTÓWW INŻYNIERII Szybki postęp w inżynierii obejmującej budownictwo
Dr inż. Marcin Kot Kraków, 15.03.2013 Akademia Górniczo-Hutnicza Wydział Inżynierii Mechanicznej i
FLUID MECHANICS LAB In field of Engineering like Civil & Mechanical Engineering Fluid
Hydraulic/ Fluid Lab In field of Engineering like Civil & Mechanical Engineering Hydraulic
Wydział Inżynierii Mechanicznej i Informatyki FacultyofMechanical Engineering and Computer
Wydział Inżynierii Mechanicznej i Informatyki Faculty of Mechanical Engineering and Computer
mUNIVERSITY/dfTechnology and life Sciences IN BYDGOSZCZ/ /FACULTY OF MECHANICAL ENGINEERING DEPARTME

więcej podobnych podstron