Stabilizer bar, removing and installing Page 1 of 2
40-101
Stabilizer bar, removing and
installing
Removing
- Remove noise insulation panel.
- Remove nuts -1-.
- Remove connecting links from stabilizer bar.
- Remove nuts -2-.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU01.40.10 11/20/2002
Stabilizer bar, removing and installing Page 2 of 2
40-102
Installing
- Install bushings and stabilizer bar.
Do not apply grease
Arrows on connecting links point in direction of travel
- If replacing stabilizer bar, check which suspension version vehicle is
equipped with.
Tightening torques:
Connecting link to stabilizer bar: 100 Nm (74 ft lb) (always use new
ribbed nuts)
Nuts -2-: 25 Nm (18 ft lb) (always replace)
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU01.40.10 11/20/2002