Wyniki wyszukiwana dla hasla 28247 Suzuki RM125( suziki rm125 60 the 8 th click lick 4-16 MACHINĘ TUNINGREAR SUSPENSION TUNING The rear suspension cosuziki rm125 61 MACHINĘ TUNING 4-17SPRING PRE-LOAD ADJUSTMENT • Place a błock undesuziki rm125 62 4-18 MACHINĘ TUNINGREAR SUSPENSION TUNING PROCEDURĘ • Adjust the rear suspension accsuziki rm125 63 MACHINĘ TUNING 4-19 After the sag measurement has been set between 97 mm (3.82 in) tsuziki rm125 64 4-20 MACHINĘ TUNINGSUSPENSION BALANCE Balancing the front to rear suspension properlsuziki rm125 67 ENGINE REMOVAL AND INSTALLATION 5-3ENGINE REMOYAL AND INSTALLATIONREMOVAL • &nsuziki rm125 68 5-4 ENGINE REMOVAL AND INSTALLATION • Remove the exhaust pipę fitting springs with tsuziki rm125 70 5-6 ENGINE REMOVAL AND INSTALLATION • Remove the cotter pin © and suziki rm125 71 ENGINE REMOVAL AND INSTALLATION 5-7 • Extract three quarters of thsuziki rm125 72 5-8 ENGINE REMOVAL AND INSTALLATIONINSTALLATION • Reassemble the rsuziki rm125 73 ENGINE REMOVAL AND INSTALLATION 5-9 • Reassemble the drive Chain clip so the slit ensuziki rm125 76 CYLINDER, PISTON AND EXHAUST VALVE 6-3ENGINE TOP SIDECYLINDER HEAD REMOVAL • &suziki rm125 77 _CAUTION_ Be careful not to bend the top end of the valve shaft arm spring. Loosen tsuziki rm125 79 6-6 CYLINDER, PISTON AND EXHAUST VALVECYLINDER HEAD INSPECTION • Rsuziki rm125 80 CYLINDER, PISTON AND EXHAUST VALVE 6-7 CYLINDER, PISTON AND EXHAUST VALVE 6-7 Measursuziki rm125 81 6-8 CYLINDER, PISTON AND EXHAUST VALVE 6-8 CYLINDER, PISTON AND EXHAUST VALVEPISTON-suziki rm125 82 CYLINDER, PISTON AND EXHAUST VALVE 6-9PISTON RING AND PISTON REASSEMBLY • &nbssuziki rm125 83 6-10 CYLINDER, PISTON AND EXHAUST VALVE • Install the exhaust valvsuziki rm125 84 CYLINDER, PISTON AND EXHAUST VALVE 6-11 _CAUTION_ If the piston pin end is not at thsuziki rm125 85 6-12 CYLINDER, PISTON AND EXHAUST VALVE • Tighten the cylinder head nuts to the specWybierz strone: [
22 ] [
24 ]
