Wyniki wyszukiwana dla hasla suziki rm12577 suziki rm125 70 5-6 ENGINE REMOVAL AND INSTALLATION • Remove the cotter pin © and suziki rm125 71 ENGINE REMOVAL AND INSTALLATION 5-7 • Extract three quarters of thsuziki rm125 72 5-8 ENGINE REMOVAL AND INSTALLATIONINSTALLATION • Reassemble the rsuziki rm125 73 ENGINE REMOVAL AND INSTALLATION 5-9 • Reassemble the drive Chain clip so the slit ensuziki rm125 76 CYLINDER, PISTON AND EXHAUST VALVE 6-3ENGINE TOP SIDECYLINDER HEAD REMOVAL • &suziki rm125 77 _CAUTION_ Be careful not to bend the top end of the valve shaft arm spring. Loosen tsuziki rm125 79 6-6 CYLINDER, PISTON AND EXHAUST VALVECYLINDER HEAD INSPECTION • Rsuziki rm125 80 CYLINDER, PISTON AND EXHAUST VALVE 6-7 CYLINDER, PISTON AND EXHAUST VALVE 6-7 Measursuziki rm125 81 6-8 CYLINDER, PISTON AND EXHAUST VALVE 6-8 CYLINDER, PISTON AND EXHAUST VALVEPISTON-suziki rm125 82 CYLINDER, PISTON AND EXHAUST VALVE 6-9PISTON RING AND PISTON REASSEMBLY • &nbssuziki rm125 83 6-10 CYLINDER, PISTON AND EXHAUST VALVE • Install the exhaust valvsuziki rm125 84 CYLINDER, PISTON AND EXHAUST VALVE 6-11 _CAUTION_ If the piston pin end is not at thsuziki rm125 85 6-12 CYLINDER, PISTON AND EXHAUST VALVE • Tighten the cylinder head nuts to the specsuziki rm125 87 6-14 CYLINDER, PISTON AND EXHAUST VALVE • Inspect the balls and thsuziki rm125 88 CLUTCH 7-1CLUTCH -CONTENTS- CONSTRUCTIONsuziki rm125 90 CLUTCH 7-3CLUTCHCLUTCH PLATĘ REMOVAL • Drain transmission oil. (CTsuziki rm125 91 7-4 CLUTCH 7-4 CLUTCHCLUTCH PLATĘ INSPECTION • Measure the drive psuziki rm125 92 CLUTCH 7-5CLUTCH PLATĘ REASSEMBLY • Apply transmission oil to the suziki rm125 93 7-6 CLUTCH • Replace the O-ring with a new one. • &nbssuziki rm125 94 CLUTCH 7-7PRIMARY DRIVEN GEAR ASS Y INSPEC-TION • Inspect the clutch sleeve hub and Wybierz strone: [
3 ] [
5 ]
