suzuki rm25019
11-10 EXHAUSTVALVE
11-10 EXHAUSTVALVE
• Install the exhaust valve governer with the exhaust valve rod ® engaged with the groove ® of the governer.
• Connect the exhaust valve rod to the exhaust valve shaft using the pin ® as a stopper.
NOTĘ:
The pin ® is one of the included parts.
[*] Exhaust valve rod bolt: 10 N m (1.0 kgf-m, 7.0 Ib-ft)
INSPECTION AFTER INSTA
After the installation, inspect the followings.
• Transmission oil level (dT‘2-9)
• Engine coolant level (d/”?-
Wyszukiwarka
Podobne podstrony:
suzuki rm25065 FRONT FORK AND STEERING 15-19 • Install the new oil seal (D with t
Suzuki RM2509 11-10 EXHAUSTVALVE • Install the exhaust valve governer with the exhaust valve rod ®
suzuki rm25015 11-6 EXHAUSTVALVE • Apply transmission oil to the exhaust valve sh
suzuki rm25017 11-8 EXHAUSTVALVE • Install a new gasket and the cap. • &nbs
29111 Suzuki RM2507 11-8 EXHAU$TVALVE 11-8 EXHAU$TVALVE * After assembling the ex
Suzuki RM2505 11-6 EXHAU$TVALVE 11-6 EXHAU$TVALVE and • Apply transmission oil to
16514 Suzuki RM250!6 19-10 $ERVICE DATA 09930-11960 Torx wrench, T20 09925-18011 Steering bearing&nb
suzuki rm25042 14-10 FRONT AND REAR BRAKES 14-10 FRONT AND REAR BRAKESREAR CALIPER REASSEMBLY Reass
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25083 16-10 REAR SUSPENSION • Apply grease to the needle roller bearings
suzuki rm25016 19-10 SERVICE DATA 09925-18011 X 09930-30113 X X Steering bearing 09930-11960 Fly
79489 Suzuki RM2502 14-10 FRONT AND REAR BRAKES 14-10 FRONT AND REAR BRAKES W REAR CALIPER REASSEMB
więcej podobnych podstron