MR293R19014 1
This opcration ia In be earricd out aft.er rcmoviny the ioof.
compositiun or thc part as suppljfd by the
PARTS DtPARTMCNT
Single part. Iłie seal support (1) is t.o be ordered aeparately.
Apply s fillet of panel beater*s bonding mastic at (2).
[T] JOINT WITH ROCIE
Thickrieases of panels (in mm)
Body side support exter>sion 0.67
Y/eldmy
Unpinking
One 25 mm MAG fillet
2 spot welds
2 spot welds joining 3 thicknesses
Wyszukiwarka
Podobne podstrony:
MR293R19041 1 This operation is to be carried out on tha body jig bench. See sub-section 40 of
3* Ropę-iS tg ht. It will be notieed that, aft er doing the duty required at one lead-end, the cours
MR293R19021 1 The wing pan*l musu be renoved beforc. this operćit.ion can be carried out. COMPOSITI
MR293R19037 1 This opcrat^on ±s addir.ional to thosc nvoiv<?d in rsploctng the
67703 MR293R19021 1 This operation ia a variation on the preceding one. Only the special featu
MR293R19025 1 Unpicking COMPOSITION OF PART AS SUPPLIED BY PARTS DEPARTMENT Panel only The two cove
87805 ST Z11 15 11ST-Z11■ SCHEMATIC DIAGRAM(This schematic diagram may be modified at any time with
MR293R19022 1 [T] JOINT WITH REAR PARCEL SHELF COMPOSITION OF part as SUPPLIED BY PARTS DEPARTMENT
MR293R19024 1 COM PO SITION or part as SUPPLIED BY PARTS DEPARTMENT JOINT WITH SIDE PANEL
więcej podobnych podstron