89 TransAlp Manual Cylinder Piston 6
CYLINDER/PISTON
CYLINDER INSTALLATION
Install the dowel pins and new gaskets.
Coat the cylinders, piston rings/grooves and pistons with oil.
Slide the cylinders over the pistons while compressing the piston rings with your fingers.
NOTĘ
• Be careful not to damage the piston rings during assembly.
• When the cylinder is halfway over the piston, route the cam Chain through the cylinder.
Install the cam chain guides.
NOTĘ _ _
• Align the guide bosses with the grooves in the cylinders.
• Make surę that the end of the guide is inserted into place in the crankcase.
Install the dowel pins.
Install new gaskets.
Install the cylinder heads Ipage 9-15).
10-6
Wyszukiwarka
Podobne podstrony:
Suzuki RM2509 COOLING SYSTEM 10-7 ♦ Install łhe dowel pins (D and new gasket _CAUTION_ Use a new ga
89 TransAlp Manual Crankshaft Transmission CRANKSHAFT/TRANSMISSION Install the M5 bushing onto the
89 TransAlp Manual Electric Starter 6 ELECTRIC STARTER Install the shims in the same location and n
89 TransAlp Manual Fuel System 4 FUELSYSTEM Install the float with the float valve toward the carbu
89 TransAlp Manual Fuel System 4 FUELSYSTEM Install the vacuum chamber with tho tab of the diaphrag
89 TransAlp Manual General Specifications Lubrication 2 8 LUBRICATION Install the outer rotor to the
89 TransAlp Manual Hydraulic Brake HYDRAULIC BRAKEr> #!> Install the boot to the bracket. Ap
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
89 TransAlp Manual Cylinder Piston 5 CYLINDER/PISTONPISTON RING INSTALLATION Clean the piston domes
89 TransAlp Manual Cylinder Piston 1 10. CYLINDER/PISTON SERN/ICE INFORMATION 10-1 PISTON RING
89 TransAlp Manual Cylinder Piston 2 CYLINDER/PISTONCYLINDER REM0VAL Remove the cylinder heads (Ref
89 TransAlp Manual Cylinder Piston 3 CYLINDER/PłSTON CYLINDER/PłSTON SERYICE LIMIT: 0.10 mm (0.004
89 TransAlp Manual Cylinder Piston 4 CYLINDER/PISTON Measure the piston ring-to-groove clearance. S
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE CYLINDER HEAD/VALVE ► Install the hold
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Install the frame bridge and tighten t
89 TransAlp Manual Cylinder Head Valve 9 0 CYLINDER HEAD/VALVE 10 N-m (1.0 kg-m. 7 ft-łbl 10 N-m (1.
89 TransAlp Manual Cylinder Head Valve 9 1 9. CYLINDER HEAD/VALVE SERVICE INFORMATION 9-1 CYLINDER
89 TransAlp Manual Cylinder Head Valve 9 Valve guide reamer JCYLINDER HEAD/VALVE Measure and record
więcej podobnych podstron