Running the simulator without save should give warning.
Easier Network messages.
Fixed Hang with unconnected Node Pulled and unconnected Bus causing inf loop.
Fixed Fonts on Zoom.
Fixed Reload of font in Display.
Network error caused simulator to think it's stopped but not allow exit.
Zoom.
Move all GateID = x to SetContacts
Move all Outputs = x to SetContacts
Counter 8 bit.
Counter Down Count.
Counter Initial value.
Redo Online help for COunter.
Backward compatability on Counter.
8 bit Register.
Set/Preset Flip Flop.
Turing Tape Head.

HIGH Logic Analyzer.
HIGH Undo, Do it.
HIGH Help, More How to.
HIGH Help, Problems/Projects.
HIGH Destroywindow in socketwnd might be causing the restart of socket problem try detach.

MED Add MIDI device.
MED Add Custom KEYPAD bitmaps device.
MED Add decimal input device and decimal output device.
MED Add a selectable Text input device (listbox).
MED Reset on Robots (goes to initial position, could reset playground).
MED Reset on Playgroud.
MED Grid should be in registry.
MED Grid needs to be split from trim.
MED When not in wire mode treat nodes same as device select (node device).
or Make selecting node easier (Not possible to select wire, then).

LOW Switch Wave over to PlayWave, why?
LOW Allow no wait on sound devices (Wave Done, Beeper?).
LOW Switch, Remove Momentary always on
LOW Wires, Push to rear (tried didn't look good)
LOW Wires, Allow invisable
LOW Sound, Make like bitmap

V1.2 Right mouse actions.
V1.2 Switch to non positional wire routing.
V1.2 To do multiple simulations have global simulator process a list of documents to be simulated.
V1.2 Add "Set as Default" to dialogs
V1.2 Add Group wide property changes.
V1.2 Add "OpenComm" Device to IO?
V1.2 Add Truth Table device with bitmap
V1.2 Add Help device
V1.2 Add Graph Device
V1.2 Add real interrupt device (WinStar)
V1.2 Add shifter.
V1.2 Add multi bit latch.
V1.2 Add Mouse Device, can be another robot !!!
V1.2 Allow multiple fonts (or at least 2).

1.0 Things done

Done HIGH Initial position should be based on the hotspot not the upperleft.
Done HIGH Rotate hotspot based on heading.
Done HIGH Reduce Signal sender/reciever bitmap size.
Done HIGH Shut off resize handles.
Done HIGH Robot bitmap pencil, eye glasses.
Done HIGH Fix edit.. in dialogs with bad file name.
Done HIGH A select that includes a wire without both devices and autoscrolls
causes error during autoscroll which causes a crash (on save?)
Done HIGH Need to double check some devices (FF/MUX) to see if they call base class simulate too often.
(seems ok).
Done HIGH Dialog for each device even if no props.
Done HIGH Autoscroll, Fix left over garbage
Done HIGH Wires, Autoscroll broken
Done HIGH Finish ALU.

Done MED General, Cleanup Unknown on some devices like display and memory.
Done MED Display, Cursor.
Done MED Display, Delete key.
Done MED Printing, Fix font on display and signal devices

1.1 Things done