{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl{\f0\fnil\fcharset0 MS Sans Serif;}{\f1\fswiss\fcharset0 Helvetica;}{\f2\fswiss\fcharset0 Helvetica-Bold;}{\f3\fnil MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\b\f0\fs20 HOLES2 Circle Of Holes
\par \pard
\par \cf0\b0\f1 Use this circle to machine a circle of holes. The machining plane must be defined before the cycle is called.
\par The type of hole is determined by the drilling hole cycle that has already been called modally.
\par
\par \b\f2\fs18 N10 G90 F140 S170 M3 T10 D1 \b0\f1\fs16 Specification of the technological values
\par \b\f2\fs18 N20 G17 G0 X50 Y45 Z2 \b0\f1\fs16 Approach starting position
\par \b\f2\fs18 N30 MCALL CYCLE82 (2, 0, 2, 30, 0) \b0\f1\fs16 Modal call of the drilling cycle, without dwell
\par time.
\par \b\f2\fs18 N40 HOLES2 (70, 60, 42, 33, 0, 4) \b0\f1\fs16 Call of the circle-of-holes cycle; the incremental
\par angle is calculated in the cycle since the parameter Incremental angle has been omitted
\par \b\f2\fs18 N50 MCALL \b0\f1\fs16 Deselect modal call
\par
\par \b\f2\fs22 Programming example: Circle of holes
\par \b0\f1\fs20 The program uses CYCLE82 to produce 4 holes having a depth of 30 mm. The final drilling depth is specified as a relative value to the reference plane. The circle is defined by the center point X70 Y60 and the radius 42 mm in the XY plane. The starting angle is 33 degrees. The safety clearance along the drilling axis Z is 2 mm.\f3\fs16
\par }