{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl{\f0\fnil\fcharset0 MS Sans Serif;}{\f1\fswiss\fcharset0 Helvetica;}{\f2\fswiss\fcharset0 Helvetica-Bold;}{\f3\fnil MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\b\f0\fs20 HOLES1 Row Of Holes
\par
\par \pard\cf0\b0\f1 This cycle can be used to produce a row of holes, i.e. a number of holes arranged along a straight line, or a grid of holes. The type of hole is determined by the drilling hole cycle that has already been called modally.
\par
\par \b\f2\fs18 N20 G17 G90 X20 Z105 Y30 \b0\f1\fs16 Approach starting position
\par \b\f2\fs18 N30 MCALL CYCLE82 (105, 102, 2, 22, 0, 1) \b0\f1\fs16 Modal call of the drilling cycle
\par \b\f2\fs18 N40 HOLES1 (20, 30, 0, 10, 20, 5) \b0\f1\fs16 Call of row-of-holes cycle; the cycle starts
\par with the first hole; only the drill positions are approached in this cycle
\par \b\f2\fs18 N50 MCALL \b0\f1\fs16 Deselect modal call
\par
\par \b\f2\fs22 Programming example: Row of holes
\par \b0\f1\fs20 Use this program to machine a row of holes consisting of 5 threaded holes arranged parallel to the Z axis of the ZX plane and which have a distance of 20 mm one to another. The starting point of the row of holes is at Z20 and X30 whereby the first hole has a distance of 10mm from this point. The geometry of the row of holes is described by the cycle HOLES1.
\par First, drilling is carried out using CYCLE82, and then tapping is performed using CYCLE84 (tapping without compensating chuck). The holes are 80 mm in depth (difference between reference plane and final drilling depth).\f3\fs16
\par }