Data
Sheet
26186.120
8-BIT ADDRESSABLE
DMOS POWER DRIVER
The A6259KA and A6259KLW combine a 3-to-8 line CMOS
decoder and accompanying data latches, control circuitry, and DMOS
outputs in a multi-functional power driver capable of storing single-line
data in the addressable latches or use as a decoder or demuliplexer.
Driver applications include relays, solenoids, and other medium-current
or high-voltage peripheral power loads.
The CMOS inputs and latches allow direct interfacing with micro-
processor-based systems. Use with TTL may require appropriate pull-
up resistors to ensure an input logic high. Four modes of operation are
selectable with the CLEAR and ENABLE inputs.
The addressed DMOS output inverts the DATA input with all
unaddressed outputs remaining in their previous states. All of the output
drivers are disabled (the DMOS sink drivers turned off) with the
CLEAR input low and the ENABLE input high. The A6259KA/KLW
DMOS open-drain outputs are capable of sinking up to 750 mA. Similar
devices with reduced r
DS(on)
are available as the A6A259.
The A6259KA is furnished in a 20-pin dual in-line plastic package.
The A6259KLW is furnished in a 20-lead wide-body, small-outline
plastic package (SOIC) with gull-wing leads for surface-mount applica-
tions. Copper lead frames, reduced supply current requirements, and
low on-state resistance allow both devices to sink 150 mA from all
outputs continuously, to ambient temperatures over 85
°
C.
FEATURES
■ 50 V Minimum Output Clamp Voltage
■ 250 mA Output Current (all outputs simultaneously)
■ 1.3
Ω
Typical
r
DS(on)
■ Low Power Consumption
■ Replacements for TPIC6259N and TPIC6259DW
6259
ADVANCE INFORMATION
(Subject to change without notice)
January 24, 2000
Note that the A6259KA (DIP) and the A6259KLW
(SOIC) are electrically identical and share a
common terminal number assignment.
LOGIC
GROUND
1
2
3
8
9
13
14
15
16
17
19
4
5
6
7
12
18
20
DATA
S (LSB)
LOGIC
SUPPLY
V
DD
POWER
GROUND
CLEAR
OUT
7
OUT
6
OUT
5
Dwg. PP-050-2
OUT
0
OUT
1
OUT
2
OUT
3
OUT
4
10
11
POWER
GROUND
POWER
GROUND
ENABLE
EN
POWER
GROUND
LATCHES
DECODER LOGIC
LATCHES
0
S
1
S (MSB)
2
ABSOLUTE MAXIMUM RATINGS
at T
A
= 25
°
C
Output Voltage, V
O
............................ 50 V
Output Drain Current,
Continuous, I
O
...................... 250 mA*
Peak, I
OM
............................. 750 mA*†
Peak, I
OM
................................... 2.0 A†
Single-Pulse Avalanche Energy,
E
AS
............................................. 75 mJ
Logic Supply Voltage, V
DD
.............. 7.0 V
Input Voltage Range,
V
I
............................... -0.3 V to +7.0 V
Package Power Dissipation,
P
D
....................................... See Graph
Operating Temperature Range,
T
A
............................. -40
°
C to +125
°
C
Storage Temperature Range,
T
S
............................. -55
°
C to +150
°
C
*Each output, all outputs on.
† Pulse duration
≤
100
µ
s, duty cycle
≤
2%.
Caution: These CMOS devices have input static
protection (Class 3) but are still susceptible to
damage if exposed to extremely high static
electrical charges.
Always order by complete part number:
Part Number
Package
R
θ
JA
R
θ
JC
A6259KA
20-pin DIP
55
°
C/W
25
°
C/W
A6259KLW
20-lead SOIC
70
°
C/W
17
°
C/W
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 2000, Allegro MicroSystems, Inc.
FUNCTION TABLE
Inputs
Addressed
Other
CLEAR ENABLE DATA
OUTPUT
OUTPUTs
Function
H
L
H
L
R
Addressable
H
L
L
H
R
Latch
H
H
X
R
R
Memory
L
L
H
L
H
8-Line
L
L
L
H
H
Demultiplexer
L
H
X
H
H
Clear
L = Low Logic Level H = High Logic Level X = Irrelevant R = Previous State
LATCH SELECTION TABLE
Select Inputs
Addressed
S
2
(
MSB
) S
1
S
0
(
LSB
)
OUTPUT
L
L
L
0
L
L
H
1
L
H
L
2
L
H
H
3
H
L
L
4
H
L
H
5
H
H
L
6
H
H
H
7
LOGIC SYMBOL
G8
Z9
9,0D
10,0R
4
5
6
7
14
15
16
17
8
12
18
13
Dwg. FP-046
0
2
3
19
Z10
8M 0/7
9,1D
10,1R
9,2D
10,2R
9,3D
10,3R
9,4D
10,4R
9,5D
10,5R
9,6D
10,6R
9,7D
10,7R
DMOS POWER DRIVER OUTPUT
LOGIC INPUTS
50
75
100
125
150
2.5
0.5
0
ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS
AMBIENT TEMPERATURE IN
°
C
2.0
1.5
1.0
25
Dwg. GS-004A
SUFFIX 'LW', R = 70
°
C/W
θ
JA
SU
FF
IX
'A
', R
=
5
5
°
C
/W
θ
JA
Dwg. EP-063
OUT
IN
Dwg. EP-010-15
V
DD
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
www.allegromicro.com
Grounds (terminals 1, 9, 10, 11, and 20) must be connected externally to a single point.
V
DD
LOGIC
SUPPLY
POWER
GROUND
Dwg. FP-047-1
DATA
CLEAR
(ACTIVE LOW)
ENABLE
(ACTIVE LOW)
OUT
0
D
C1
CLR
OUT
1
D
C1
CLR
OUT
2
D
C1
CLR
OUT
3
D
C1
CLR
OUT
4
D
C1
CLR
OUT
5
D
C1
CLR
OUT
6
D
C1
CLR
OUT
7
D
C1
CLR
2
S
(MSB)
1
S
0
S
(LSB)
LOGIC
GROUND
FUNCTIONAL BLOCK DIAGRAM
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Limits
Characteristic
Symbol
Test Conditions
Min.
Typ.
Max.
Units
Logic Supply Voltage
V
DD
Operating
4.5
5.0
5.5
V
Output Breakdown
V
(BR)DSX
I
O
= 1 mA
50
—
—
V
Voltage
Off-State Output
I
DSX
V
O
= 40 V
—
0.05
1.0
µ
A
Current
V
O
= 40 V, T
A
= 125
°
C
—
0.15
5.0
µ
A
Static Drain-Source
r
DS(on)
I
O
= 250 mA, V
DD
= 4.5 V
—
1.3
2.0
Ω
On-State Resistance
I
O
= 250 mA, V
DD
= 4.5 V, T
A
= 125
°
C
—
2.0
3.2
Ω
I
O
= 500 mA, V
DD
= 4.5 V (see note)
—
1.3
2.0
Ω
Nominal Output
I
O(nom)
V
DS(on)
= 0.5 V, T
A
= 85
°
C
—
250
—
mA
Current
Logic Input Current
I
IH
V
I
= V
DD
= 5.5 V
—
—
1.0
µ
A
I
IL
V
I
= 0, V
DD
= 5.5 V
—
—
-1.0
µ
A
Prop. Delay Time
t
PLH
I
O
= 250 mA, C
L
= 30 pF
—
625
—
ns
t
PHL
I
O
= 250 mA, C
L
= 30 pF
—
140
—
ns
Output Rise Time
t
r
I
O
= 250 mA, C
L
= 30 pF
—
650
—
ns
Output Fall Time
t
f
I
O
= 250 mA, C
L
= 30 pF
—
400
—
ns
Supply Current
I
DD(off)
V
DD
= 5.5 V, Outputs OFF
—
15
100
µ
A
I
DD(on)
V
DD
= 5.5 V, Outputs ON
—
150
300
µ
A
Typical Data is at V
DD
= 5 V and is for design information only.
NOTE — Pulse test, duration
≤
100
µ
s, duty cycle
≤
2%.
ELECTRICAL CHARACTERISTICS at T
A
= +25
°
C, V
DD
= 5 V, t
ir
= t
if
≤
10 ns (unless otherwise
specified).
RECOMMENDED OPERATING CONDITIONS
over operating temperature range
Logic Supply Voltage Range, V
DD
............... 4.5 V to 5.5 V
High-Level Input Voltage, V
IH
............................
≥
0.85V
DD
Low-level input voltage, V
IL
.................................
≤
0.15V
DD
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
www.allegromicro.com
FUNCTIONAL DESCRIPTION and INPUT REQUIREMENTS
Four modes of operation are selectable by controlling
the CLEAR and ENABLE inputs as shown above.
In the addressable-latch mode, data at the DATA input
is written into the addressed transparent latch. The
addressed output inverts the data input with all other
outputs remaining in their previous states.
In the memory mode, all outputs remain in their
previous states and are unaffected by the DATA or
address (S
n
) inputs. To prevent entering erroneus data in
the latches, ENABLE should be held HIGH while the
address lines are changing.
In the demultiplexing/decoding mode, the addressed
output inverts the data input and all other outputs are OFF.
In the clear mode, all outputs are OFF and are unaf-
fected by the DATA or address (S
N
) inputs.
Given the appropriate inputs, when DATA is LOW
for a given address, the output is OFF; when DATA is
HIGH, the output is ON and can sink current.
50%
Dwg. WP-037
ENABLE
DATA
50%
w(D)
t
su(D)
t
h(D)
t
PHL
t
PLH
t
50%
ADDRESSED
OUTPUT
Dwg. WP-036
10%
90%
f
t
r
t
ENABLE
DATA
OUTPUT SWITCHING TIME
DATA INPUT REQUIREMENTS
Data Active Time Before Enable
(Data Set-Up Time), t
su(D)
.............................................. 20 ns
Data Active Time After Enable
(Data Hold Time), t
h(D)
................................................... 20 ns
Data Pulse Width, t
w(D)
....................................................... 40 ns
Input Logic High, V
IH
................................................
≥
0.85V
DD
Input Logic Low, V
IL
.................................................
≤
0.15V
DD
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
TEST CIRCUITS
Dwg. EP-066-1
OUT
INPUT
I
O
V
O
t
av
I
AS
= 1.0 A
V
(BR)DSX
V
O(ON)
0.11
Ω
100 mH
+15 V
DUT
Single-Pulse Avalanche Energy Test Circuit
and Waveforms
E
AS
= I
AS
x V
(BR)DSX
x t
AV
/2
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
www.allegromicro.com
TERMINAL DESCRIPTIONS
Terminal No.
Terminal Name
Function
1
POWER GROUND
Reference terminal for output voltage measurements (OUT
0-3
).
2
LOGIC SUPPLY
(V
DD
) The logic supply voltage (typically 5 V).
3
S
0
Binary-coded output-select input, least-significant bit.
4
OUT
0
Current-sinking, open-drain DMOS output, address 000.
5
OUT
1
Current-sinking, open-drain DMOS output, address 001.
6
OUT
2
Current-sinking, open-drain DMOS output, address 010.
7
OUT
3
Current-sinking, open-drain DMOS output, address 011.
8
S
1
Binary-coded output-select input.
9
LOGIC GROUND
Reference terminal for input voltage measurements.
10
POWER GROUND
Reference terminal for output voltage measurements (OUT
0-3
).
11
POWER GROUND
Reference terminal for output voltage measurements (OUT
4-7
).
12
S
2
Binary-coded output-select input, most-significant bit.
13
ENABLE
Mode control input; see Function Table.
14
OUT
4
Current-sinking, open-drain DMOS output, address 100.
15
OUT
5
Current-sinking, open-drain DMOS output, address 101.
16
OUT
6
Current-sinking, open-drain DMOS output, address 110.
17
OUT
7
Current-sinking, open-drain DMOS output, address 111.
18
DATA
CMOS data input to the addressed output latch. When enabled, the
addressed output inverts the data input (DATA = HIGH, OUTPUT = LOW).
19
CLEAR
Mode control input; see Function Table.
20
POWER GROUND
Reference terminal for output voltage measurements (OUT
4-7
).
NOTE — Grounds (terminals 1, 9, 10, 11, and 20) must be connected externally to a single point.
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
A6259KA
Dimensions in Inches
(controlling dimensions)
Dimensions in Millimeters
(for reference only)
NOTES:1. Exact body and lead configuration at vendor’s option within limits shown.
2. Lead spacing tolerance is non-cumulative.
3. Lead thickness is measured at seating plane or below.
0.014
0.008
0.300
BSC
Dwg. MA-001-20 in
0.430
MAX
20
1
10
0.280
0.240
0.210
MAX
0.070
0.045
0.015
MIN
0.022
0.014
0.100
BSC
0.005
MIN
0.150
0.115
11
1.060
0.980
0.355
0.204
7.62
BSC
Dwg. MA-001-20 mm
10.92
MAX
20
1
10
7.11
6.10
5.33
MAX
1.77
1.15
0.39
MIN
0.558
0.356
2.54
BSC
0.13
MIN
3.81
2.93
11
26.92
24.89
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
www.allegromicro.com
A6259KLW
Dimensions in Inches
(for reference only)
Dimensions in Millimeters
(controlling dimensions)
0
°
TO
8
°
1
2
3
0.020
0.013
0.0040
MIN.
0.0125
0.0091
0.050
0.016
Dwg. MA-008-20 in
0.050
BSC
20
11
0.2992
0.2914
0.419
0.394
0.5118
0.4961
0.0926
0.1043
0
°
TO
8
°
1
20
2
3
0.51
0.33
0.10
MIN.
Dwg. MA-008-20 mm
1.27
BSC
11
0.32
0.23
1.27
0.40
7.60
7.40
10.65
10.00
13.00
12.60
2.65
2.35
NOTES:1. Exact body and lead configuration at vendor’s option within limits shown.
2. Lead spacing tolerance is non-cumulative.
6259
8-BIT ADDRESSABLE
DMOS POWER DRIVER
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
The products described here are manufactured under one or more
U.S. patents or U.S. patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support devices or systems without express written approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsi-
bility for its use; nor for any infringement of patents or other rights of
third parties which may result from its use.
Wyszukiwarka
Podobne podstrony:
6259
6259
6259
06 BIOCHEMIA lancuch odechowyid 6259 ppt
6259
6259
więcej podobnych podstron