SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01
www.cobra.it
PETROL X
AUDI A6* 03 DIESEL

MAKE MOD. YEAR
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens in the engine compartment, driver s side.
POSITION
CENTRAL UNIT POSITION Position the modular systems and the modules on the left of the steering column, driver s
side.
POWER SUPPLY +30: connect with a ring terminal to one of the general power supply terminal in the fuse box.
- 31: connect with a ring terminal directly to the car body.
IGNITION WIRE +15/54: connect to the 1,5 mm2 BLUE/BLACK, wire at the position nr.4, of the orange
connector nr.15 located on the connectors holder plate behind the left bulkhead, driver s side.
DIRECTION INDICATORS Connect to the BLACK/WHITE wires at the position nr.9 and BLACK/GREEN wires at the
position nr.10, in the 10 way light brown connector, located behind the left sill cover, driver s
side.
ELECTRIC WINDOWS Comfort locking
Negative control signal
The locking of the windows is obtained timing the GREEN/BLUE doors closure wire of the
vehicle.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Art. 3800 Vehicle Position
YELLOW/BLACK GREEN/VIOLET Pos. nr. 10, 16 way black connector nr.2
GREY/BLACK GREEN/GREY Pos. nr. 7, 16 way black connector nr.2
VIOLET Ground Car body
ORANGE Ground Car body
VIOLET/WHITE Ground Car body
ORANGE/WHITE Ground Car body
The 16 way black connector is located in the central of the central locking unit placed under
the moquette of the footrest of the driver s side seat.
IMMOBILISATION POINT Fuel pump
Cut the 1,5 mm2 GREEN/YELLOW wire, at the position nr.32, of the 6 way light blue
connector, near the connector mentioned above.
STARTER Relay pump supply
Cut the 1,5 mm2 GREEN/YELLOW wire located in the wiring harness coming out of the fuse
marked nr. 34 in the fuse box.
BONNET SWITCH Install an additional switch near the left lateral headlamp.
DOORS SWITCH Connect to the GREEN/YELLOW wires at the position nr.1, RED/GREY at the position nr.10,
BLACK/RED at the position nr.12 and BLACK/VIOLET at the position nr.14 located in the 16
way light brown connector coming out of the modular system under the moquette on front of
the driver s seat.
BOOT SWITCH Positive polarity control signal
Connect to the 1 mm2 RED/GREEN wire at the position nr.9 located in the 12 way black
connector coming out of the modular system under the moquette on front of the driver s seat.
aua603gbbtr1.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.