0.This one is a bit different
just launch the executable and wait for the installation to start.

1.Install Autodesk Autocad Inventor Suite
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 .. or anything matching this template

3.Use as Product Key :
Depending on the product key you enter the installation procedure will install a different edition of inventor.
If you want to install Inventor Standard 2011 please use the product key: 527C1.
If you want to install Inventor Professional 2011 please use the product key: 462C1
During the installation you can select or deselect the AutoCAD Mechanical and / or the Vault Client.

4.Finish the installation & restart Autodesk Product

5.Before clicking on Activate
You have 2 options :
- a) Disable Your network Card, pull the network cable out or block with firewall
(this is just to disable online serial check)
OR
- b) Click on Activate and it will tell you that your serial is wrong, simply click
on close et click on activate again.

Choose option a or b.

6. Select I have an activation code from Autodesk

7.Once at the activation screen:
start XFORCE Keygen 32bits version if you are installing a 32bits application and
64bits if you are installing a 64bits application.
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
You have a fully registered autodesk product

NO LAME DLL PATCHING .....



NB:
1.Make sure you are running the Keygen as administrator and with UAC off on Vista or Windows7
but you have to anyway to install Adesk products.