RADIONIC ANALYSIS BOX


This is an instrument designed to give the answer of any question as a numerical readout
between 0 and 100. It is useful for finding out such things as the percentage of a color in
someone's aura or the strength of a radionic transmission.


To make this instrument you will need:


A printout of the pattern


18 ceramic magnets (usually available from Radio Shack)


1 Potentiometer (value unimportant)


1 piece of aluminum foil


1 cardboard box


1 length of wire


1 knob


1 plastic can lid


Making the instrument:


1. Glue the pattern to the top of the cardboard box.


2. Punch a hole for the stem of the potentiometer at the center of the large, calibrated
area.


3. Punch a small hole at the center of the box marked Witness.

4. Attach the wire to the potentiometer at any of its points.


5. Attach the potentiometer to the box so that the stem comes out the center of the
calibration.


6. Bring the wire out through the center of the witness box and lay it flat in the box. Cut
any excess.


7. Glue the foil square over the witness box.


8. Attach the knob to the potentiometer stem.


9. Glue the ceramic magnets to the small circles around the central circle.


To use this instrument:


1. Decide what it is you want to know, such as the amount of blue in the aura of a
friend.


2. Place the witness of the subject to be analyzed on the foil plate.


3. While turning the knob, rub the plastic lid with your thumb until you get a stick (you
will know it when it happens).


The numerical reading on the dial will be the answer to your question.