Stirling Products : Liquid air production plants http://www.stirling.nl/sp/sp11.html
StirLAIR: Stirling liquid air production plants
Safe liquid air supply
Equipped with the innovative Stirling AirLock, the stand-alone StirLAIR plants are truly performance plus technology. Featuring high
energy efficiency, high productivity, controlled operation, low maintenance and only a 10 minute start-up time. They are the only
way to make your liquid air production self sufficient and highly reliable.
A StirLAIR frees you from all inconveniences. It is comperatively small, and needs no gas reserves whatsoever: it simply uses air.
It can be fitted to almost any existing liquid gas system or incorporated in new developments.
High on thrills, low on maintenance
Liquid air enables you to realize revolutionary new special effects. It does not deplete oxygen in the environment and becomes
breathable air again. So if you want to create crowd-pleasing special effects, with liquid air it is perfectly safe to combine fog,
smoke ánd flames.
Stirling equipment is characterized by an extremely high degree of safety and reliability. It is also straightforward and easy to use,
so no special operators are required. New production techniques greatly decrease the frequency of maintenance intervals. A
single plant gives you your own reliable, problem-free and consistent supply of liquid air for many years to come (more than half
the installed Stirling cooling plants have been in operation for more than 15 years). Plus you have the constant reassurance of
Stirling s global service network as a back-up.
With the StirLAIR you get:
Standard
Single switch operation
Standard
Fully automatic start and stop
Standard
10 Minute start-up
Standard
Lowest energy consumption
Standard
Storage tank with level control
Standard
Integrated system diagnostics
Standard
Low noise level
Standard
Full production guaranteed to 45°C
Standard
Automatic restart after power failures
Stirling supplies a range of fully automatic Liquid Air Production Plants:
StirLAIR-1 Compact
StirLAIR-1
StirLAIR-2
StirLAIR-4
StirLAIR-8
StirLAIR-1 Compact
The StirLAIR-1 Compact is our most popular, plug and play solution. It takes up little space, but has a big
effect on your ability to produce and store liquid air. It is single skid mounted, pre-calibrated and ready to
go to work. Simply connect water and power and start producing your own liquid air.
The StirLAIR-1 Compact includes a compressor, an air drying unit, a Stirling Process Cryogenerator
(SPC-1), and a 300 liter storage vessel equipped with the innovative Stirling AirLock. It produces at at least
9.5 usable liters per hour of liquid air at nominal operating conditions. The pressure in the vessel can be set
from 0.2 to 3 barg, increasing the liquid air production to 13 l/hr. The liquid is dispensed through a flexible
hose by opening a valve. The rated power is 14.5 kW if tap water is used. Operators only need to replace
Click for enlargement.
filters and compressor oil and perform routinechecks between maintenance intervals, which is 6,000
operating hours.
Delivery time for the StirLAIR-1 Compact is less than three months.
Technical information:
Production capacity : at least 9.5 usable liters of liquid air
Maintenance : every 6,000 operating hours
Cooling water consumption : 1,150 l/hr
Rated power : 14.5 kW
Main supply : any specified main supply
1 de 4 05/07/2007 18:25
Stirling Products : Liquid air production plants http://www.stirling.nl/sp/sp11.html
Start-up time : within 10 minutes.
Start/stop procedure : fully automatic, single switch operation
Minimum advised plant room : 2.90 x 3.10 x 3.00 m (l x w x h)
Total nett weight : 1,150 kg
Ambient temperature : up to 45 °C ; 113 °F
Relative humidity : up to 95%
Storage capacity : 300 liters
Storage vessel pressure : 0.3-3 bar(g)
Site installation time : 2 days
Noise level : 70 dBA.
Optionals:
Chiller for cooling water supply;
Generator set for power supply;
Voltage stabilizer for utility power stabilization;
Spares and tools for preventive and corrective maintenance;
Liquid air handling package (gloves, protection glasses).
Top of page
StirLAIR-1
The StirLAIR-1 produces at least 9.5 usable liters per hour of liquid air at nominal operating conditions. The
pressure in the storage vessel can be set from 0.3 to 5 bar(g), increasing the liquid air production to 15.5
l/h. The liquid air is dispensed through a flexible hose by opening a valve. The rated power is 14.5 kW if tap
water is used. Operators only need to replace filters and compressor oil and perform routine checks
Click for enlargement.
between maintenance intervals, which is 6,000 operating hours.
The StirLAIR-1 is based on the proven 1-cylinder SPC-1 Stirling Process Cryogenerator as liquefier. The
plant includes a 500 l storage vessel.
Technical information:
Production capacity : at least 9.5 usable liters of liquid air
Maintenance : every 6,000 operating hours
Cooling water consumption : 1,150 l/hr
Rated power : 14.5 kW
Main supply : any specified main supply
Start-up time : within 10 minutes.
Start/stop procedure : fully automatic, single switch operation
Minimum advised plant room : 4.50 x 3.50 x 3.00 m (l x w x h)
Total nett weight : 1,300 kg
Ambient temperature : up to 45 °C ; 113 °F
Relative humidity : up to 95%
Storage capacity : 500 liters
Storage vessel pressure : 0.3-5 bar(g)
Site installation time : 3-5 days
Noise level : 70 dBA.
Optionals:
Chiller for cooling water supply;
Generator set for power supply;
Voltage stabilizer for utility power stabilization;
Spares and tools for preventive and corrective maintenance;
Liquid air handling package (gloves, protection glasses).
Top of page
2 de 4 05/07/2007 18:25
Stirling Products : Liquid air production plants http://www.stirling.nl/sp/sp11.html
StirLAIR-2
The StirLAIR-2 produces at least 20 usable liters per hour of liquid air at nominal operating
conditions. The pressure in the storage vessel can be set from 0.3 to 5 bar(g), increasing the liquid
air production to 31.5 l/h. The liquid air is dispensed through a flexible hose by opening a valve. The
rated power is 28 kW if tap water is used. Operators only need to replace filters and compressor
oil and perform routine checks between maintenance intervals, which is 6,000 operating hours.
Click for enlargement.
The StirLAIR-2 is based on two proven 1-cylinder SPC-1 Stirling Process Cryogenerators as
liquefiers. The plant includes a 1,000 l storage vessel.
Technical information:
Production capacity : at least 20 usable liters of liquid air
Maintenance : every 6,000 operating hours
Cooling water consumption : 1,900 l/hr
Rated power : 28 kW
Main supply : any specified main supply
Start-up time : within 10 minutes.
Start/stop procedure : fully automatic, single switch operation
Minimum advised plant room : 5.50 x 3.70 x 3.00 m (l x w x h)
Total nett weight : 2,800 kg
Ambient temperature : up to 45 °C ; 113 °F
Relative humidity : up to 95%
Storage capacity : 1,000 liters
Storage vessel pressure : 0.3-5 bar(g)
Site installation time : 4-6 days
Noise level : 70 dBA.
Optionals:
Chiller for cooling water supply;
Generator set for power supply;
Voltage stabilizer for utility power stabilization;
Spares and tools for preventive and corrective maintenance;
Liquid air handling package (gloves, protection glasses).
Top of page
StirLAIR-4
The StirLAIR-4 produces at least 42 usable liters per hour of liquid air at nominal operating conditions. The
pressure in the storage vessel can be set from 0.4 to 5 bar(g), increasing the liquid air production to 71
l/h. The liquid air is dispensed through a flexible hose by opening a valve. The rated power is 55 kW if tap
water is used. Operators only need to replace filters and compressor oil and perform routine checks
Click for enlargement.
between maintenance intervals, which is 6,000 operating hours.
The StirLIN-4 is based on the proven 4-cylinder SPC-4 Stirling Process Cryogenerator as liquefier. The
plant includes a 2,000 l storage vessel.
Technical information:
Production capacity : at least 42 usable liters of liquid air
Maintenance : every 6,000 operating hours
Cooling water consumption : 4,500 l/hr
Rated power : 55 kW
Main supply : any specified main supply
Start-up time : within 10 minutes.
Start/stop procedure : fully automatic, single switch operation
Minimum advised plant room : 6.00 x 4.80 x 4.00 m (l x w x h)
Total nett weight : 3,500 kg
Ambient temperature : up to 45 °C ; 113 °F
Relative humidity : up to 95%
Storage capacity : 2,000 liters; 528 gallon
Storage vessel pressure : 0.4-5 bar(g)
Site installation time : 4-6 days
Noise level : 72 dBA.
Optionals:
Chiller for cooling water supply;
Generator set for power supply;
Voltage stabilizer for utility power stabilization;
Spares and tools for preventive and corrective maintenance;
3 de 4 05/07/2007 18:25
Stirling Products : Liquid air production plants http://www.stirling.nl/sp/sp11.html
Liquid air handling package (gloves, protection glasses).
Top of page
StirLAIR-8
The StirLAIR-8 produces at least 85 usable liters per hour of liquid air at nominal operating conditions.
The pressure in the storage vessel can be set from 0.4 to 5 bar(g), increasing the liquid air production to
144 l/h. The liquid air is dispensed through a flexible hose by opening a valve. The rated power is 110 kW
if tap water is used. Operators only need to replace filters and compressor oil and perform routine checks
Click for enlargement.
between maintenance intervals, which is 6,000 operating hours.
The StirLIN-8 is based on two proven 4-cylinder SPC-4 Stirling Process Cryogenerators as liquefiers. The
plant includes a 2,000 l storage vessel.
Technical information:
Production capacity : at least 85 usable liters of liquid air
Maintenance : every 6,000 operating hours
Cooling water consumption : 9,000 l/hr
Rated power : 110 kW
Main supply : any specified main supply
Start-up time : within 10 minutes.
Start/stop procedure : fully automatic, single switch operation
Minimum advised plant room : 6.50 x 4.80 x 4.00 m (l x w x h)
Total nett weight : 6,000 kg
Ambient temperature : up to 45 °C ; 113 °F
Relative humidity : up to 95%
Storage capacity : 2,000 liters; 528 gallon
Storage vessel pressure : 0.4-5 bar(g)
Site installation time : 4-6 days
Noise level : 74 dBA.
Optionals:
Chiller for cooling water supply;
Generator set for power supply;
Voltage stabilizer for utility power stabilization;
Spares and tools for preventive and corrective maintenance;
Liquid air handling package (gloves, protection glasses).
Top of page
Fast links: menu | general | products | applications | user groups | consulting group | Stirling India
4 de 4 05/07/2007 18:25