You can either run FastActivate.exe direct from your PC (just select your device or SD card reader drive letter when prompted)
or copy it to the root of your device/SD card & run it from there.

Buttons:

1. Update meta.txt
Update to latest meta.txt available (if servers are not down). You need to allow wget.exe in your firewall if asked.

Note: If you have a new meta code which is not in the integrated or updated meta.txt (See in program for date of current integrated meta.txt)
then you must put all new meta codes in a file named META.TXT and copy it to the same location as FastActivate.exe.


2. Patch Maps, Voices, Speedcams and Fuel Prices
Activate/Patch ALL these in your device.


3. Patch Navcore (ttsystem or PNDNavigator)
Patch Your Navcore with this which is needed to use patched maps. Wait and it will tell you when done.


4. Patch TomTom HOME
This will run automatically and there is no need to search for any files, just wait and it will tell you when done.


Note: If you use this on a new Navcore you MUST first use TomTom HOME "Operate my Device" option; this will then download your profile (.dll) files;
then close TomTom HOME and patch it.


5. RunMeForCode (Create a meta/blowfish code from a genuine map)
You can create a meta code with this button...BUT you MUST be the original owner of the map.
Remember... meta data does NOT contain any personal information from you or your device. It is safe to share.


6. Update QuickGPSfix (Fix your GPS position)
Your TomTom device uses the signals of at least 4 satellites to find out where you are. To start navigating, it needs to know exactly where each
satellite is.
So start your journey faster with TomTom the QuickGPSfix button


7. My Device Info
This is just info from your device which others need if you ask for help (on most forums).


8. Quit

_______________________________________________________________________________________


General Notes:
If you have trouble running the .exe then "right click and run as administrator"
If you use Wince and mapshare crack copy ttnavigator.bif to ttgo.ori

If You use special characters in windows user name program may halt. eg. &, <, >, |, ^

If you are doing a fresh instal on internal memory then you will need to restart the unit once after installation BEFORE you try and patch the map
because on the restart your device will generate the required ttgo.bif file for the keygen to read.
Similarly, if you are installing to an SD card rather than the internal memory the same applies and you will need to insert the SD card into the device
and reboot to create the required ttgo.bif file for the keygen to read.

By biggerdave