Firmware update on Funai LCD-TV Model LH7-M32BB 1) change File Name of new Firmware for example : new F/W File Name is : funai_LC7_EU_ZF536232FB1OS-025.bin must be changed to : upgrade.pkg 2) load the renamed F/W to an empty USB-Memory Stick 2) Connect the TV to AC Power - The TV must be in Standby Mode (red LED is ON) 3) Plug in the Memory Stick into the USB Port at the TV 4) Power ON the TV - the green LED will go ON - the green LED flashes, it means that the new F/W is uploading. - no indication on the LCD Screen during uploading the F/W for about 2 - 3 minutes. 5) When uploading is finnished, the TV screen indication is like on attached Picture 1 - select yes and OK then F/W update starts as shown on attached Picture 2 - When Picture 3 is shown, the F/W has been successfully updated. 6) press Power OFF - unplug the Memory Stick from TV (otherwise the update start again at next Power ON. 7) Power ON the TV and check new F/W. - use special prepared Remote Control (same as used for LT6 Models with hidden Key) USBk0000膭00膮0艢0偶0贸00n0艂fM0踓H0膮e誰0艂0+T0