Acknowledgements to BlackSide, -=Mario=- i Deemonru :)

MediasatConnect v2.9.8 added:
===============================
Record to the service card of the any file ( tps.bin, RSA_KEYS, ... )
- 'ServiceCard' page
- checkbox 'LOADER'
- press the button 'Open list' and point the file of the list ( ex. tps.bin )
- mark in the list the file which you want to send to STB ( ex. 0: TPS )
- choose COM
- choose baudrate '9600'
- press the button 'Connect'
- press the button 'Save to SC'
This is all.

The reading of the file in STB 'MENU, 8, 1, 4'.

julekjulek
=============================================================

MediasatConnect v2.9.7 added:
===============================
'Options' page checkbox 'tps.bin for 6071/6072'
the mark results in the dispatch of the file tps.bin in the format for Philips 6071/6072

The idea sat4all is not paid !!!!
---------------------------------

julekjulek
=============================================================

MediasatConnect v2.9.6 added:
===============================
1. Support for USb to serial adapters (tested on driver Prolific Technologies
ser2pl-sys v 2.0.0.7, used by many such devices)
- if using an USB adapter go to Options page and select checkbox "Use USB to Serial Adapter"
- it supports now all program functions including: Pilot, Dump/Send, EMU keys, MHW Patch, subtitles.
- support for Service card reading/saving may depend on functionality of programmer via USB adapter
- under some circustamces when sending a list it may be necessary to send one folder at time.
2. adjusted dump lenght for 1630 channel list and firmware

changes by pippo61 under julekjulek aproval
=============================================================


MediasatConnect v2.9.5 added:
===============================
a) Specially accomplished to work in conjunction with mediabox' serial firmware downloader.
To download firmware to the box:
1. Open desired COM port.
2. Run firmware bootloader on the box (menu->8->5 for OFM). You should see
*** BCT-1530 serial DL ready ***
at the trace window and "dLSr" on the box' LED display.
If something is wrong then consult a community ;)
3. Click the button 'Firmware', choose a firmware (or patch) file to download.
4. Choose box' model or directly enter the address at which you are going to write this firmware or patch.
5. Wait for completition and watch the trace window, if everything is OK then you should see 'Done' here.
Downloading process is quite fast (about 6 seconds per flash sector, so 1-2 minutes for the entire firmware).
6. Close COM port at the end, and box should reboot.

Thanks Deemonru :)

b) the correction of taking keys cryptoworks from the file SoftCam.Key
for the altered format, in software STB

julekjulek
=============================================================

MediasatConnect v2.9.3 added:
===============================
a) for auto_rool dodges AES near the help of the connection RS(COM)-the tuner
the stop of rolling, on the basis of the signature read from the tuner

b) the correction of taking dodges 'constant_CW' from the file SoftCam.Key
- enough the key would by to be taken to the dispatch,
then provider in the file provi.txt has to be added (W 021C00 ;Redlight)

julekjulek
=============================================================

MediasatConnect v2.9 added:
===============================
a) the record of the log in the time the shutdown of the programme
- the logs are written down in the catalogue ' Log' in the the main catalogue of the programme
- the name for files in the format dd-MM-yy_hh-mm.log
- one can switch off the record of the files of logos, in the tuck 'Options'

b) the function ' Au AES ON'
- the key is not sent to the tuner in the case of the incorrect reading of the data of key
(the incorrect working of web page)
- after reading the key, the file SoftcamAES.key (used in auto_rool) is checked,
if there is no read key in him, then he is added to the list of keys automatically

julekjulek
=============================================================

MediasatConnect v2.8 added:
===============================
a) the service by the MediasatConnect of the container system TRAY
if you will click the right button in the area ' RS232'
or in the area of the icon MC in TRAY the options will appear you to the choice

b ) auto_rool dodges AES near the help of the connection RS(COM)-the tuner
- please press on tuner
+, MENU, 6, 4 - enabling of RS232 (or also press 2x_A, 4) for:
flash dumping, RSA-keys sending, managing the tuner with help of
virtual remote control from PC ...

- in the catalogue of the programme the file SoftcamAES.key with keys to rolling in the format:
-----
V 007C00 01 11223344556677881122334455667788
V 007C00 01 88776655443322118877665544332211
...
-----

- turn on the tuner on some channel TPS

- the tuck ' EMU Keys' press the button ' Rool AES ON'
MC what 3 sek undy, he takes keys in turn and sends to the tuner
in the window of the log you have information then:
-----
Rool TPS AES KEY Enable
11223344556677881122334455667788
2 new keys received
Key # 3 for provi 7c00 updated.
Key # 13 for provi 7c00 updated.
...
-----

- when you will observe, he is reproduced from the vision of the TV
then press ' Rool AES OFF'

Attention:
1. The file with keys to rolling has to have I will name SoftcamAES.key
2. One can alter the time of sending next keys
in MediasatConnect.ini, section [ConfigAutoInetAES],
parameter TimRoolaes (the time been passed in seconds)

julekjulek
=============================================================

MediasatConnect v2.7 added:
===============================
MediasatConnect.ini the section [ConfigAutoInetAES]
making possible writing the parameters of the work, for AutoInetAES

julekjulek
=============================================================

MediasatConnect v2.6 added:
===============================
- please press on tuner
+, MENU, 6, 4 - enabling of RS232 (or also press 2x_A, 4) for:
flash dumping, RSA-keys sending, managing the tuner with help of
virtual remote control from PC ...

An automatic search in Internet and downloading of frequently changing
AES-keys for TPS packet is performed.
- program will send the keys to the tuner only when they change
on the website

- checking frequency (in seconds) may be changed in MediasatConnect.ini

(the "freshness" of AES-keys will depend on quality/speed of
the web-page refreshing)

julekjulek
=============================================================

MediasatConnect v2.5
ADDED:
===============================
'EMU Keys' now serves 'constant_CW'

Through PC-RS(COM)-tuner connection
- please press
+, MENU, 6, 4 - RS232 is now ON (or use 2x_A, 4) and will do this:
dump flash, RSA-keys sending out, remote control management from PC ...

a) automatic CW-entering from any SoftCam.Key-file type is POSIIBLE
quite enough if 'constant_CW' will be be written in this file as below
W AAAA:BBBBBB:CCFF:DDDD:EEEE::11223344556677881122334455667788 ; info
where:
AAAA - encryption system
BBBBBB - provider
CCFF - service_ID
DDDD - PMT_ID
EEEE - video_ECM
112233... - constant_CW
- Mark 'Choose file'
- Press 'File to EMU' and provide file with 'constant_CW'
It will be automaticly sent out to the tuner.

b) MANUAL adding of 'constant_CW' data is also possible through pressing 'EMU Keys manually'
Here's how to enter them having a SoftCam.Key by the hand
'CA System' - choose 'Constant CW'
'Ident' - gets '000000' value and is of no importance
'Key index' - CC in this example, the high nibble from 'service_ID'
'Key type' - FF in this example, the low nibble from 'service_ID',
'Key Len' - enter value '14'
key value - DDDDEEEE11223344556677881122334455667788
in this example the values in a row -> 'PMT_ID' + 'video_ECM' + 'constant_CW'
- press '>>' (Add key) after having entered the value
- 'Send Keys' the key will be sent out to receiver

julekjulek
===================================
latest translation and check:
Yaro - 18.05.2006, 17.11
===================================

MediasatConnect buttons short description:

( by default: firmware OFM inside, tuner is connected to PC through RS)

Remote Controller
-----
Fully functional remote controller for a tuner using PC.

-included:
2x_MENU (front panel of the tuner) - RS communication turning ON/OFF
signalled on tuner's LED
ON - CoM1
OFF- CoM0
enables to manage the tuner through RS connection
and remote controller simulating software
or
+, MENU, 6, 4 - RS232 turning ON/OFF (also 2x_A, 4 may be used):
dump flash, RSA-keys sendind, tuner managing through PC ...


Dump/Send
---------
- 'Dump' - reading data from tuner/dumping of e.g. channel list
and saving it to HDD
(please press +, MENU, 6, 4 in a row)

- 'Open list'- opens list of channels from HDD

After choosing of folders to be sent out to tuner 'Send folders'
option becomes active - this means sending of the chosen files
to tuner through RS connection
(please press MENU, 8, 3 to activate port COM-RS232,
you may send list of channels or other files from PC to tuner)

ServiceCard
-----------
Two-way work with list of channels with the help of the
service-card

EMU Keys
--------
Automatic keys downloading from Internet and sending them out to
tuner
(please press +, MENU, 6, 4 or 2x_MENU (on front panel of tuner).

When you start downloading for the first time,
an exemlary provi.txt - file is created describing
providers whose keys will be sent out.
A necessary condition of correct keys-sending for any given provider
will be this provider's presence in EMU (except from this requirement, system is Cryptoworks).

In MediasatConnect.ini it's possible to provide a different link
for a SoftCam.Key file, as well parametres for n2 keys (and Crypto) can be edited,
should this need emerge.

Under 'Automatic Keys' there are different options like these:

No option is chosen - internet keys will be sent to tuner.

'Inet to file' - internet keys are taken and saved to a file,
but without sending them out to tuner.

'File to EMU'- keys downloading from the default file in MC directory
and sendind them to tuner.
'Choose file'- manual choice of the file from which the keys should be downloaded.

'Not RSA_KEYS' - this option should be chosen only if HDL in a tuner
does not serve RSA_KEYS file (i.e. n2 keys are of different length);
in that case, MC will change n2 keys' format to n1 and send them to
a 'normal' EMU.

Button 'EMU Keys manually' - manual edition of the keys to be sent
or entered by user. Here, option 'to emu' near 'Nagra'
enables also to send the nagra keys to a 'normal' EMU.

MHWpatch
--------
(MENU, 8, 3 - COM-RS232 connection should be enabled,
sending of channel list or other files to a tuner)
You can send ANY files from PC to tuner.
The file may be dragged from HDD to 'File:'

Subtitles
---------
Reading texts from movie text-files and making subtitles on TV screen.
(please press C - this activates subtitling function).

MC is able to read from three file formats:
1 - normal format (time text)
---
00:00:34:I say the Japanese have created a sword.
00:00:39:Legend says the waters which evaporated from the ocean
...
2 - patch text format
---
{839}{959}I say the Japanese have created a sword.
{959}{1079}Legend says the waters which evaporated from the ocean
...
3 - format xxxx.srt
------------
1
00:00:34,000 --> 00:00:38,000
I say the Japanese have created a sword.

2
00:00:39,000 --> 00:00:43,000
Legend says the waters which evaporated from the ocean
...
------------

The file of subtitles read by MC may be sent to tuner and seen
later on without connecting PC to tuner.
To send the file you must press MENU, 8, 3 to activate COM-RS232,
the same should be done to send out list of channels or other files
from PC to tuner.

A correct reading of subtitles ,showing them on TV screen,and sending them
out to tuner will be provided only with Windows 1521 (cyrylic) encoding.

To view correct Russian subtitles one should have russian version of OFM
in a receiver.