LabVIEW: (Hex 0xBFFC0012) Error intepreting the instrument's response
LabVIEW: Start index out of range
LabVIEW: Start index, value, or tolerance is NaN
LabVIEW: Waveform X axis value requested is out of range.
LabVIEW: Waveforms have different dt values.
LabVIEW: Duration input is not an integer multiple of dt. Value was coerced to nearest integer multiple of dt.
LabVIEW: Start time input is not an integer multiple of dt. Value was coerced to nearest integer multiple of dt.
LabVIEW: Index is out of range in a put operation.
LabVIEW: The contents of the reply you are accessing have not arrived yet.
LabVIEW: No handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler.
LabVIEW: Unknown Apple event address type.
LabVIEW: Handler did not get all required parameters.
LabVIEW: Wrong keyword for a special function.
LabVIEW: No user interaction allowed.
LabVIEW: Apple event timed out.
LabVIEW: User canceled out of wait loop for reply or receipt.
LabVIEW: Invalid sending mode was passed.
LabVIEW: AEResetTimer was passed an invalid reply parameter.
LabVIEW: AEResetTimer was passed an invalid reply parameter.
LabVIEW: The event is not an Apple event.
LabVIEW: Need a newer version of Apple Event Manager.
LabVIEW: Operation involving a list item failed.
LabVIEW: Not a valid descriptor record.
LabVIEW: Wrong descriptor type.
LabVIEW: Data in an Apple event could not be read.
LabVIEW: Descriptor record was not found.
LabVIEW: Data could not be coerced to the requested descriptor type.
LabVIEW: Instrument-specific error.
LabVIEW: Function not supported by controller.
LabVIEW: Error accessing VXI address.
LabVIEW: Error unmapping VXI address.
LabVIEW: Error mapping VXI address.
LabVIEW: Instrument timed out.
LabVIEW: Error in configuring timeout.
LabVIEW: Error interpreting instrument response.
LabVIEW: Error placing instrument in local mode.
LabVIEW: Instrument not initialized.
LabVIEW: Error reading from instrument.
LabVIEW: Error writing to instrument.
LabVIEW: Error reading from instrument to file.
LabVIEW: Error writing to instrument from file.
LabVIEW: Error polling instrument.
LabVIEW: Error triggering instrument.
LabVIEW: Error clearing instrument.
LabVIEW: Instrument identification query failed.
LabVIEW: Unable to close instrument.
LabVIEW: Unable to open instrument.
LabVIEW: Error setting attribute.
LabVIEW: Error getting attribute.
LabVIEW: Error closing instrument.
LabVIEW: Parameter out of range.
LabVIEW: Invalid Instrument Handle.
LabVIEW: Unable to initialize interface or instrument.
LabVIEW: Error finding instruments.
LabVIEW: Invalid syntax string.
LabVIEW: Destination port requires authentication.
LabVIEW: Location name is invalid.
LabVIEW: Service method is other than ppcServiceRealTime.
LabVIEW: Invalid user reference number.
LabVIEW: User's password is wrong.
LabVIEW: PPCStart failed because destination did not have an inform pending.
LabVIEW: An error has occurred in the network.
LabVIEW: Unable to create a new userRefNum.
LabVIEW: The default userRefNum does not yet exist.
LabVIEW: User has not specified owner name in Sharing Setup Control Panel.
LabVIEW: PPCPortRec is invalid.
LabVIEW: The session has closed.
LabVIEW: The port was closed.
LabVIEW: Unable to contact destination application.
LabVIEW: A system resource is missing.
LabVIEW: User has not named his Macintosh in the Network Setup Control Panel.
LabVIEW: Destination rejected the session request.
LabVIEW: User name unknown on destination machine.
LabVIEW: Another port is already open with this name (perhaps in another application).
LabVIEW: Bad parameter or invalid state for this operation.
LabVIEW: Invalid session reference number.
LabVIEW: PPC Toolbox is unable to create a session.
LabVIEW: Port does not exist at destination.
LabVIEW: Network activity is currently disabled.
LabVIEW: The system is unable to allocate memory. This is a critical error, and you should restart.
LabVIEW: Invalid port name. Unable to open port or bad portRefNum.
LabVIEW: Invalid or inappropriate locationKindSelector in locationName.
LabVIEW: PPC Toolbox has not been initialized.
LabVIEW: Networked machine was not found.
LabVIEW: Remote registry services not available or remote administration not enabled.
LabVIEW: Cannot create a stable subkey under a volatile parent key.
LabVIEW: Cannot create a symbolic link in a registry key that already has subkeys or values.
LabVIEW: System could not allocate the required space in a registry log.
LabVIEW: Illegal operation attempted on a registry key that has been marked for deletion.
LabVIEW: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
LabVIEW: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
LabVIEW: The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
LabVIEW: One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
LabVIEW: The configuration registry key could not be written.
LabVIEW: The configuration registry key could not be read.
LabVIEW: The configuration registry key could not be opened.
LabVIEW: The configuration registry key is invalid.
LabVIEW: The configuration registry database is corrupt.
LabVIEW: Attempted to read beyond last key or value.
LabVIEW: Remote registry access denied.
LabVIEW: Specified key or value does not exist.
LabVIEW: Invalid Registry refnum.
LabVIEW: Incorrect data type specified.
LabVIEW: Undetermined Windows registry error.
LabVIEW: An input parameter is invalid.
LabVIEW: Memory full.
LabVIEW: Out of zone.
LabVIEW: End of file.
LabVIEW: File already open.
LabVIEW: Generic file I/O error.
LabVIEW: File not found.
LabVIEW: File permission error.
LabVIEW: Disk full.
LabVIEW: Duplicate path.
LabVIEW: Too many files open.
LabVIEW: System feature not enabled.
LabVIEW: Resource file not found.
LabVIEW: Cannot add resource.
LabVIEW: Resource not found.
LabVIEW: Image not found.
LabVIEW: Image memory error.
LabVIEW: Pen does not exist.
LabVIEW: Configuration type invalid.
LabVIEW: Configuration token not found.
LabVIEW: Configuration parse error.
LabVIEW: Configuration memory error.
LabVIEW: Bad external code format.
LabVIEW: Bad external code offset.
LabVIEW: External code not present.
LabVIEW: Null window.
LabVIEW: Destroy window error.
LabVIEW: Null menu.
LabVIEW: Print aborted.
LabVIEW: Bad print record.
LabVIEW: Print driver error.
LabVIEW: Operating system error during print.
LabVIEW: Memory error during print.
LabVIEW: Print dialog error.
LabVIEW: Generic print error.
LabVIEW: Invalid device refnum.
LabVIEW: Device not found.
LabVIEW: Device parameter error.
LabVIEW: Device unit error.
LabVIEW: Can't open device.
LabVIEW: Device call aborted.
LabVIEW: Generic error.
LabVIEW: Operation canceled by user.
LabVIEW: Object ID too low.
LabVIEW: Object ID too high.
LabVIEW: Object not in heap.
LabVIEW: Unknown heap.
LabVIEW: Unknown object (invalid DefProc).
LabVIEW: Unknown object (DefProc not in table).
LabVIEW: Message out of range.
LabVIEW: Null method.
LabVIEW: Unknown message.
LabVIEW: Manager call not supported.
LabVIEW: The network address is ill-formed.
LabVIEW: The network operation is in progress.
LabVIEW: The network operation exceeded the user-specified or system time limit.
LabVIEW: The network connection is busy.
LabVIEW: The network function is not supported.
LabVIEW: The network is down, unreachable, or has been reset.
LabVIEW: The specified network address is currently in use.
LabVIEW: Serial port parity error.
LabVIEW: The system could not allocate the necessary memory.
LabVIEW: Serial port overrun error.
LabVIEW: The system caused the network connection to be aborted.
LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server.
LabVIEW: Serial port framing error.
LabVIEW: The network connection is not established.
LabVIEW: Serial port timeout; bytes not received at serial port.
LabVIEW: The network connection is already established.
LabVIEW: The network connection was closed by the peer.
LabVIEW: Handler does not know what occurrence to wait for.
LabVIEW: Occurrence queue overflow.
LabVIEW: File datalog type conflict.
LabVIEW: Semaphore not signaled.
LabVIEW: Interapplication Manager unrecognized type error.
LabVIEW: Memory corrupt.
LabVIEW: Failed to make temporary DLL.
LabVIEW: Old CIN version.
LabVIEW: Format specifier type mismatch
LabVIEW: Unknown format specifier
LabVIEW: Too few format specifiers
LabVIEW: Too many format specifiers
LabVIEW: Scan failed
LabVIEW: Error converting to variant.
LabVIEW: Run-time menu error.
LabVIEW: VI's password tampered.
LabVIEW: Variant attribute not found.
LabVIEW: Incompatible variant data type.
LabVIEW: ActiveX Event Data was not available.
LabVIEW: ActiveX Event Information was not available.
LabVIEW: The Occurence associated with the ActiveX Event was not Found.
LabVIEW: The ActiveX Event Queue could not be created.
LabVIEW: ActiveX Event Data was not available.
LabVIEW: Null Refnum was passed in as input.
LabVIEW: IVI Invalid downcast
LabVIEW: IVI No Class Session Opened
LabVIEW: Singlecast connections can not send to multicast addresses.
LabVIEW: Multicast connections can not send to singlecast addresses.
LabVIEW: Specified IP address not in multicast address range.
LabVIEW: Attempt to write to read-only multicast connection.
LabVIEW: Attempt to read from write-only multicast connection.
LabVIEW: The VI is not in a state compatible with this operation.
LabVIEW: The VI's front panel is not open.
LabVIEW: The VI cannot run because it has a front panel control in an error state.
LabVIEW: The VI is not executable.
LabVIEW: The VI is not in memory.
LabVIEW: VI execution has been disabled in VI Properties.
LabVIEW: FPDCO on connector pane thinks it is constant.
LabVIEW: No IP Rec in Summary.
LabVIEW: Cannot load connector pane.
LabVIEW: Variant tag out of range.
LabVIEW: No default or operate data.
LabVIEW: VI Creation failed.
LabVIEW: Cannot load Block Diagram Heap.
LabVIEW: Cannot load Front Panel Heap.
LabVIEW: Linker error.
LabVIEW: Printer is not responding. Check printer configuration.
LabVIEW: Cannot load History.
LabVIEW: VI has been modified on disk since it was last loaded or saved.
LabVIEW: Unspecified error occurred.
LabVIEW: Untitled SubVIs exist.
LabVIEW: This CIN can only be invoked from a registered wizard.
LabVIEW: Illegal Object Id passed to wizard CIN.
LabVIEW: Wizard Template not found.
LabVIEW: Wizard template does not have a diagram.
LabVIEW: Call Instrument aborted.
LabVIEW: Application Reference is invalid.
LabVIEW: VI Reference is invalid.
LabVIEW: Reference can not be reserved as requested or is in improper reservation mode for requested operation.
LabVIEW: Attribute selector is invalid.
LabVIEW: VI Server property is read-only.
LabVIEW: VI Reference is already reserved for editing.
LabVIEW: VI Reference type does not match VI connector pane.
LabVIEW: VI Server access denied.
LabVIEW: Bad run-time menu file version.
LabVIEW: Bad run-time menu file.
LabVIEW: Operation is invalid for this type of VI.
LabVIEW: Method selector is invalid.
LabVIEW: Incompatible VI Server protocol version.
LabVIEW: Required parameter missing.
LabVIEW: VI was aborted.
LabVIEW: VI is password protected.
LabVIEW: Incorrect password
LabVIEW: Attempted recursive call.
LabVIEW: Feature not supported in this application.
LabVIEW: VI is locked.
LabVIEW: Null Refnum passed to Close Reference.
LabVIEW: LabVIEW can't initialize the script server.
LabVIEW: LabVIEW can't set a variable to the script server.
LabVIEW: LabVIEW can't get a variable from script server.
LabVIEW: LabVIEW can't set script text to the script server.
LabVIEW: The server failed to execute the script sent by LabVIEW. An error message has been received.
LabVIEW: A VI of that name already exists in memory.
LabVIEW: The VI name is invalid.
LabVIEW: At run time, LabVIEW can't find script support dll
LabVIEW: The specified object was not found.
LabVIEW: Object reference is invalid.
LabVIEW: Specified object is not scriptable in this version.
LabVIEW: Type mismatch: Object cannot be typecasted to the specified type.
LabVIEW: Specified property not found.
LabVIEW: Unexpected file type.
LabVIEW: Object cannot contain(own) the specified object.
LabVIEW: Unable to create new object.
LabVIEW: Specified objects cannot be wired together.
LabVIEW: Specified terminal not found in the object.
LabVIEW: The specified VI may not be saved for previous because it resides in the VI.LIB directory.
LabVIEW: The path to the VI to save is an empty or relative path. It must be an absolute path.
LabVIEW: Specified method not found.
LabVIEW: This property or method is not yet implemented.
LabVIEW: This property is writable or this method is available only when the VI is in edit mode.
LabVIEW: Cannot create a control/indicator for the specified terminal.
LabVIEW: Cannot create a constant for the specified terminal.
LabVIEW: VI is not debuggable.
LabVIEW: Invalid property value.
LabVIEW: Not valid for strict type definitions.
LabVIEW: Invalid connector pane pattern.
LabVIEW: Specified control or indicator cannot be hooked up to the connector pane.
LabVIEW: Invalid connector terminal.
LabVIEW: Wrong Control Type
LabVIEW: No DataSocket Available
LabVIEW: Bad value for parameter.
LabVIEW: Specified object cannot be moved.
LabVIEW: VI Server or client received an unrecognized message.
LabVIEW: Queue and notifier references of the same name must be obtained using the same data type.
LabVIEW: Cannot prepare non-reentrant VI for reentrant run.
LabVIEW: No object of that name was found. No reference could be returned.
LabVIEW: Insufficient priviliges to read, write, or create an item in the DataSocket Server.
LabVIEW: The string input terminal is unwired.
LabVIEW: The XML tag describing the type of data is not recognized.
LabVIEW: No end tag was found for an XML start/end tag pair.
LabVIEW: An unknown or unexpected XML tag was discovered.
LabVIEW: The XML tag describing the type of data does not match the wired type.
LabVIEW: The XML enumerated type choice(s) does not match the wired type.
LabVIEW: XML value text is illegal or out of range for type and/or format.
LabVIEW: Unsupported data type.
LabVIEW: No indicator is wired to the output terminal.
LabVIEW: Invalid refnum.
LabVIEW: Invalid string.
LabVIEW: A request for a synchronous advise transaction has timed out.
LabVIEW: The response to the transaction caused the DDE_FBUSY bit to be set.
LabVIEW: A request for a synchronous data transaction has timed out.
LabVIEW: The DDEML function was called without first calling the DdeInitialize function or an invalid instance identifier was pass to a DDEML function.
LabVIEW: An application initialized as APPCLASS_MONITOR has attempted to perform a DDE transaction, or an application initialized as APPCMD_CLIENTONLY has attempted to perform server transactions.
LabVIEW: A request for a synchronous execute transaction has timed out.
LabVIEW: A parameter failed to be validated by the DDEML: e.g., the data handle is initialized with a different name-item or different clipboard data format than that required; the application used a client-side conversation handle with a server-side function, or vice-versa; the application used a freed data or string handle; or more than one instance of the application used the same object.
LabVIEW: A DDEML application has created a prolonged race condition (where the server application outruns the client), causing large amounts of memory to be consumed.
LabVIEW: A memory allocation failed.
LabVIEW: A transaction failed.
LabVIEW: A client's attempt to establish a conversation has failed.
LabVIEW: A request for a synchronous poke transaction has timed out.
LabVIEW: An internal call to the PostMessage function has failed.
LabVIEW: An application instance with a synchronous transaction already in progress attempted to initiate another synchronous transaction, or the DdeEnableCallback function was called from within a DDEML call function.
LabVIEW: A server-side transaction was attempted on a conversation that was terminated by the client, or the server terminated before completing a transaction.
LabVIEW: An internal error has occurred in the DDEML.
LabVIEW: A request to end an advise transaction has timed out.
LabVIEW: An invalid transaction identifier was passed to a DDEML function. Once the application has returned from an XTYP_XACT_COMPLETE callback, the transaction identifier for that callback is no longer valid.
LabVIEW: Invalid command code.
LabVIEW: Occurrence timeout; the transaction timed out before it completed.
LabVIEW: ActiveX Event Data was not available.
LabVIEW: ActiveX Event Information was not available.
LabVIEW: The Occurence associated with the ActiveX Event was not Found.
LabVIEW: The ActiveX Event Queue could not be created.
LabVIEW: (Hex 0x3FFC0101) ID Query not supported
LabVIEW: (Hex 0x3FFC0102) Reset not supported
LabVIEW: (Hex 0x3FFC0103) Self-test not supported
LabVIEW: (Hex 0x3FFC0104) Error Query not supported
LabVIEW: (Hex 0x3FFC0105) Revision Query not supported