Bed Extender User s Information
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. 1
RIDGELINE
Introduction
Thank you for purchasing this Honda accessory.
Please read this user s information carefully before using the bed extender, and keep this information
in the glove box for future reference.
This product is designed to be used exclusively on a Honda Ridgeline. Honda is not responsible if the product
is used for anything other than its intended purpose.
This user s information should be considered a permanent part of the vehicle. It should remain with the vehicle
at all times and stay with the vehicle when sold.
SYMBOLS
If instructions are preceded by the following symbols, they will give helpful advice or information.
ADVICE INFORMATION
" Gives advice to prevent damage to the Gives helpful information or instructions to be
product. followed in using the product.
" Gives advice to handle emergency situation.
2 © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
Bed Extender Arrangement
Installation with the Tailgate Opened Flat Installation in the Forward Position
NOTICE
LABEL
NOTICE LABEL
4N23032K
4N23011K
ADVICE
To avoid damage to the tailgate or the bed
Installation with the Tailgate Closed
extender:
" Rotate the bed extender forward.
" Do not exceed 300 lbs (136 kg) on tailgate.
Close the tailgate.
" Be sure extender is properly installed before
NOTICE
driving.
LABEL
" Do not secure cargo to the tailgate or the
extender.
INFORMATION
Install the bed extender so that the notice label
comes to the right side of the vehicle.
4N25501K 4N23022K
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. 3
Installation
Installing the Bed Extender Vertically:
" Open the tailgate. Insert the right and left " Rotate the bed extender backward. Snap the
projections from the bed extender into the right straps attached to the bed extender to the
and left latches. snaps.
BED EXTENDER
PROJECTION
SNAP
RIGHT LATCH
SNAP
SNAP
LEFT LATCH
BED
EXTENDER
4N23040K
PROJECTION
TAILGATE 4N23900K
SNAP
4 © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
Installation
Installing the Bed Extender Installing the Bed Extender
Horizontally: in the Forward Position
" Insert the right and left " Snap the straps attached to the " Wind each strap onto a bar of
projections from the bed bed extender to the snap. the bed extender and secure
extender into the right and left the straps as shown.
latches. Push down the bed
" Insert the right and left
extender until the engaged
projections from the bed
parts lock.
extender into the right and left
SNAP
latches on the front brackets.
LEFT
Push down the bed extender
LATCH
PROJECTION
SNAP
until the engaged parts lock.
PROJECTION
LEFT
PROJECTION
LATCH
BED
SNAP
EXTENDER
BED
EXTENDER
4N23061K
STRAP
SNAP
BED
RIGHT
EXTENDER
LATCH
4N23050K
4N23091K
RIGHT
PROJECTION
LATCH CLIP
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. 5
Removal
Removing the Bed Extender Vertically:
" Unsnap the straps and rotate the bed extender " Pull the bed extender up to remove. Close the
upward. tailgate.
BED EXTENDER BED EXTENDER
STRAP
STRAP
4N23101K
4N23111K
6 © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
Removal
Removing the Bed Extender Horizontally: Removing the Bed Extender from the Forward
Position
" Unsnap the straps. Unlock the right and left
latches by pulling the lever toward you and " Unlock the right and left latches by pulling the
remove the bed extender by pulling it up straight. lever toward you then remove the bed extender
by pulling it up straight.
" Close the tailgate.
LEFT/RIGHT
LEFT/RIGHT
LATCH
LATCH
LEVER
Pull the lever
LEVER
toward you to
Pull the lever
unlock.
toward you to
unlock.
STRAP
BED
EXTENDER
STRAP
BED
4N23121K
EXTENDER
TAILGATE 4N23152K
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. 7
8 © 2005 American Honda Motor Co., Inc - All Rights Reserved. © 2005 American Honda Motor Co., Inc. - All Rights in Japan
08L26-SJC-1000-81 PrintedReserved.