Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
View of complete model (Side view)
View of complete model (Front view)
The "Jaguar- MkII SALOON" is a compact saloon from Jaguar, which made its debut in 1959 at an
automobile show in London.The model featured an original styling, its four-door body designed with a
sleek, streamlined finish. It also made use of sash-type doors and windows, considered innovative at the
time. The Jaguar-MkII SALOON came in 2.4, 3.2, and 3.8 liter types, each featuring a straight-six DOHC
View of complete model (Back view)
engine.As for the vehicle's suspension, the front sported a double wishbone suspension while the rear
had a rigid axel suspension.Furthermore, disc brakes were installed on all four wheels. Equipped with a
Parts list (Assembly Instructions) : Twelve A4 sheets (No.1 ~ No.12)
high-powered engine, excellent suspension, and powerful brakes, the Jaguar-MkII has also participated
in touring car championships and rallies. While its great performance led it to be known as the best
No. of Parts: 154
sporty saloon at the time, it was also the core model produced by Jaguar up until 1967.
This Papercraft Jaguar-MkII SALOON is about one thirteenth the size of the real car.
*Bulid the model by carefully reading the Assembly Instructions,
*This model was designed for Papercraft and may differ from the original in some respects. in the parts sheet page order.
Assembly Instructions
Glue tab notation key
Mountain fold
Scissors line
How to make the cylinders
Make a Mountain fold
Cut along the line
Each glue tab has a symbol and
This craft involves making cylinders
number printed on it. marks
with diameters of 3 to 7mm, so it may
surfaces to put glue on; they should
Wrap around and be helpful to have some rods of sizes then be glued to the corresponding .
about 0.5mm thinner handy.
glue to the top of the cylinder.
Valley fold Cut in Line
Apply glue here
Guide rod
Make a Valley fold Cut along the red solid line
Glue, scissors and other tools
Attach here
Trace along the folds with
may be dangerous to young children
a ruler and a used pen (no ink)
so be sure to keep them out of the
Layer wrapping (roll)
Glue to the rear of
to get a sharper, easier fold.
Completed parts
reach of young children.
Wrap around and glue to the
become a cylinder the other part
cylinder,to use as a glue tab
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
Valley fold
2-C
Mountain fold
4-A
3-C
2-B
3-G
3-F
3-B
2-A
5-D
Valley fold
Mountain fold
3-A
Mountain fold
Cross-sectional view after
attaching 3-A/3-B to 2-A/4-A.
Mountain fold
Valley fold
2-D
5-C
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
3-E
6-Y
6-L
3-D
4-B
4-D
4-C
4-E
3-H
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
6-N/D
9-B
8-A/B
9-A
5-B
8-A
5-A
6-M
7-A
7-D/8-D
Use 2 pieces per a tire.
Attach in line with the
dotted lines on 7-D/8-D.
Apply glue to the underside
7-C/8-C 6-R/X
8-B
7-A/7-B
8-A/8-B
7-B
7-A/B
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
When making the 14-B glue tabs:
Where to attach the parts.
First, fold and make creases along all the mountain fold lines.
Then, cut it out.
11-B
11-F
11-A/C
11-I
11-A/C
Cut along the line
Use the 14-B glue tab.
Use the 14-B glue tab.
Use the 14-B glue tab. 11-D/E
Cut away any protruding
glue tabs.
11-M/N
11-A/C
11-B
12-E/F
Be careful when
attaching since the
11-G/H
"glue tabs" are small.
11-A
12-E/F
11-C
11-A/C
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
Where to attach 12-E/12-F.
Adjust them so that they are aligned
with the body's tip (red lines) and
12-E
that the lights are facing forwards.
Cross-sectional view
12-F
when attaching the parts.
Attach 12-E/F to 11-B.
12-O
Attach this
11-J
part too.
10-B
10-A
Also put glue on the underside of
10-A/B and attach it.
12-H
12-I
When attaching 11-A/B and 10-A/B,
start from the lower hem.
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
1.First, attach the top part.
2.After attaching the top part,
attach the other end
Align10-A/B's lower hem with 5-C/D's
by aligning it with the lower hem.
lower hem and attach them together.
Firmly fold and crease the 10-A/B "glue tab" at the line
12-B
where the colors change on the 9-A/B side. Then,
12-A
attach it by carefully aligning it with the other part.
Do not attach
9-A/B and 6-Y.
When attaching the body,
start from the door (see circled area).
Attach both sides first.
Attaching the head to
2-A should be done after
attaching both sides.
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
13-A
13-P
13-A
Place 13-A between 9-A/B and 10-A/B
and attach 10-A/B and 13-A only.
"Glue tabs" of 13-P.
13-A
Cross-sectional view
13-P
10-A/B
9-A/B
Insert 13-P from the underside of
13-A, and attach it to the side of 13-A.
Insert 13-A to the same Do not attach
9-A/B.
position on both sides.
Attach to the
14-B
underside.
Cut away any protruding glue tabs.
Attach 13-A to the "glue tabs" of 9-A/B. Cross-sectional view
Caution 1
Fit 13-A in place and adjust its position 3-C side
10-A/B
before gluing it. After deciding the position, start attaching it
from the center of 13-A and continue in an outward direction.
White dotted line
Attach this part after determining
13-A
3-C body line
where to insert both sides of 13-A.
12-B
Attach 13-A so that the width
of the folds on both sides Where to attach 3-C body
are the same.
and 10-A/B.
When attaching 13-A to 6-Y, do so by placing your hand
10-A
9-A
under it so that it can be attached securely with no gaps.
9-B
How to attach 13-A
10-B
Adjust the gap by cutting slots on 6-Y.
1.After cutting slots on 6-Y, attach 13-A to 12-B.
2.Attach both sides of 13-A to the "glue tabs" of 9-A/B.
When attaching both sides
3.Attach 10-A/B to 6-Y (* Caution 1).
of 13-A to 9-A/B, do so by placing
Before attaching 13-A,
4.Attach 13-A to 6-Y while adjusting the gap.
your hand under it so that the sides
6-Y
cut slots as shown.
can be attached securely with no gaps.
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
13-G/H
13-L
13-E/F
13-N
13-I 13-Q
13-F
12-M
13-M
13-K
13-E
13-O
12-N
12-Q
12-D
12-R
12-C
Attach 10-C/D
before attaching
the rear bumper.
Attaching 10-A/B.
Attach it along the line.
12-G
12-L
When attaching the rear bumper,
12-J
make sure that it is parallel
to the ground.
Check the position before attaching.
12-K
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
14-A
Attach the "glue tabs" of
14-B to the underside.
Make a mountain fold on
13-B/C and attach it together.
Next, make a valley fold
Before attaching the"glue tabs"
along the fold line as shown.
of 14-B to 14-A, attach them to
9-A/B and 12-A/B.
Attach 14-A in the following order:
14-B
Attach the front part first, then
the two sides, starting from the front
and working back. Finally,
attach the rear part securely. 13-B/C
Attach 14-A in the following order:
Attach the front part first, then the
two sides, starting from the front
and working back. Finally,
attach the rear part securely.
Bend 13-B/C while it is still damp
so that it will dry curved.
Attach 13-B to the 10-A side,
and 13-C to the 10-B side.
13-D
6-P
6-Q
11-K/L
12-P
12-P
13-R
13-J
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara
When attaching the muffler, do so by adjusting the angles in
accordance with the body's slant.
6- J
Attach the muffler to the side of 2-A.
Do not attach these parts
6- K
but insert them only.
6-I
6-H
Align the marks
on the black lines
6- F
together when attaching
6- G
each of the parts.
Insert the muffler into 6-L.
6-C
Attach the muffler to
the side of 2-A.
6- B
6- D
6- A
6-E
Canon ® is a registered trademark of Canon Inc. Canon Inc. M.Kajiwara