{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl{\f0\fnil\fcharset0 MS Sans Serif;}{\f1\fnil MS Sans Serif;}{\f2\fswiss\fcharset0 Helvetica;}{\f3\fnil\fcharset238 Arial Narrow;}}
{\colortbl ;\red255\green0\blue0;\red0\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\b\f0\fs22 CHR SIDE CHAMFERING Y_ANGLE\f1\fs24
\par \pard
\par \cf0\b0\f2\fs20 The programmed value for chamfer is automatically reduced if the contour
\par length of an involved block is insufficient.
\par No chamfer is inserted, if more than three blocks in the connection are programmed that do not contain any information for traversing in the plane or a plane change is carried out.
\par
\par
\par \b Example\b0
\par \cf2\f3 G00 X0 Y10 Z2
\par G01 Z-10
\par G01 X12 Y12
\par G01 X35 ANG=6 RND=17
\par G01 Y80 ANG=60 CHR=4
\par G01 X10
\par G00 Z2
\par \cf0\f2
\par \f1\fs16
\par }