UFODIAG
www.ufodiag.com
Installation instructions for D-CAN for GT1 and INPA
Installation
1. Install diaghead.exe
2. Install Vmware-player
3. Copy two subfolders EDIABAS and INPA in INPA parent folder to c:\.
4. Copy DIS v55.0_english.part02.rar from dis55+tis2007.12+dis44(coding+progman) folder to c:\. And unzip DIS
v55.0_english.part02.rar it in C disk by extract to DIS v55.0_english.part02
5. Edit system path, add
right click my computer , select properties ; you will see Environment Variable in system properties window, click it to edit
the user variable[U];
often there should be the path at user variable column. If your computer shows the same information as below without the
path in user variable, please add the path matically.
UFODIAG
www.ufodiag.com
Steps about how to add the path in user variable:
Please click Edit button to add the path:
Name: path
Value: c:\ediabas\bin;
After you input the name and value, click Yes , you will finish the user variable modify.
6. Connect device to computer and install ftdi drivers.
7. Install d-can usb device (usb2.0 ftdi driver)
8. Check your com port number
9. Setup "latensy timer = 1"
10. Set c:\ediabas\hardware\obd\obd.ini port=com2 (your usb-com port number)
11. Run c:\ediabas\hardware\obd\obdsetup.exe
12. Restart windows
13. Change main network adapter ip to 192.168.68.1,please don t change vmware network adapter ip
If your computer has no LAN port, please add a virtual network adaptor (advice to add the adaptor instead of the LAN cable, m
ore convenient for usage)
How to add the virtual network adaptor:
Click start , then click setting to select control panel ; in the control panel window, please double click add hardware ;
a new adding hardware guide window comes out, please click next button.;
UFODIAG
www.ufodiag.com
it will search the hardware to add, then it will shows you this window: click Yes, I have connected the hardare .
Click Next button, you will see this window, select the add new hardware option, click Next button.
UFODIAG
www.ufodiag.com
You will see this window, please select install the h
Then you will this window, click Network adaptor , then click Next ;
Please click Microsoft , you will see all types of Network adaptors. Please select Microsoft Loopback adapter , Then click
Next .
Click Next to finish the virtual network adaptor.
14. Change c:\ediabas\bin\ediabas.ini port= 6801, if needed.
Operations
INPA:
Run c:\inpa\bin\inpa.exe
UFODIAG
www.ufodiag.com
GT1: need set local network ip address
Go to network connection window, click the local network the Microsoft loopback adapter you just added, not your physical
network adaptor;
Also please don t change vmware IP addresses.
Right click the local network the Microsoft loopback adapter you just added and select properties to set the IP address
UFODIAG
www.ufodiag.com
At this step, please check the vmware bridge protocol also:
After you click properties , you will see this window, please set the IP address as the picture shows.
Click Yes to exit.
UFODIAG
www.ufodiag.com
15. After you finish the IP setting, Run c:\ediabas\bin\ifhsrv32.exe
16. Run diaghead.exe
Select diaghead menu
17. Run vwware
Open c:\dis 55 english\dis 55 english.vmdk
Click button (in gt1 software main screen)
Click button
Click button
Click