`
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Website: gs.mot.com
FIELD SERVICE BULLETIN
FSB Number: LVCCFSB2005-231(Revision A)
Author: Amador Hassell
Date: August 12, 2005
Total No. of Pages: 4
Subject: GSM Razr V3 Hinge Broken
Model Affected: All Regions,
Level of Repair: 1, and 2
Problem
Service is aware that some V3 Razr units have been returned with complaints related to
broken flip knuckles. The failure mode analysis has revealed that repeated impacts on
the front housing knuckles (both, hinge and shaft) can weaken the knuckles and
originate cracks. Frequently, the units have been returned after the users have dropped
them on hard surfaces.
Fig.1. Cracked Knuckle
Solution
The front housing has been redesigned to include enhancing cross beams. The beams,
placed in both knuckles, strengthen the cross section profile of the knuckles and reduce
the deflection that causes the cracked knuckles.
MOTOROLA INTERNAL USE ONLY Page 1
`
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Website: gs.mot.com
Fig. 2. Enhanced knuckles design.
NEW DESIGN OLD DESIGN
Service Action
Customer Returns:
When servicing any GSM Razr V3 customer return with a complaint related to broken
flip knuckles, then:
1. Since the nature of the failure compromises the phones cosmetics, mark only
the main board, the display assembly and the camera assembly for reuse.
2. Applying steps 10 thru 15 of the K-Flex repair procedure (LVCCFSB2005-93)
rebuild the unit using the parts with the enhanced design. These parts are:
Flip Inner (1590025N02/03 Silver and 1590025N04/05 - Black), End Cap-
Shaft (1589126Y01), End Cap Hinge (1589127Y01), Front Housing
Assembly (1590043N03/N04 -Silver and1590043N07/N08 -Black) and Hinge
Spacer (1587510Y01). Reuse the main board and the display assembly.
MOTOROLA INTERNAL USE ONLY Page 2
`
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Website: gs.mot.com
Update (Right Hinge /End Cap-Ground Clip):
The End Cap Hinge Ground Clip (PN: 4290214N01) needs to be ordered as a
separate part from the End Cap Hinge (1589127Y01). The ground clip from the
original housing can be reused. In order to reuse the ground clip:
a. Using a tool with a thin prong, displace the ground clip from the End
Cap Hinge.
b. Place the ground clip in the new redesigned End Cap Hinge. Make sure
the ground clip makes solid contact with the hinge.
MOTOROLA INTERNAL USE ONLY Page 3
`
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Website: gs.mot.com
3. Once the Flip/Housing assembly has been rebuilt, proceed to place the
Grounding Contact (4289441Y01).
Fig 2. Placement of the Grounding Clip
4. Place the Camera Gasket (PN: 0587343Y02). Position the Camera Assembly
in its cradle and connect the Camera Assembly to the Display Assembly.
Fig 3. Placement of the Camera Gasket
5. Applying steps 16 thru 18 of the K-Flex repair procedure (LVCCFSB2005-93),
complete the reassembly procedure by placing the flip cover and fastening
the display assembly screws.
6. Perform a full display/keypad functional test.
MOTOROLA INTERNAL USE ONLY Page 4
`
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Website: gs.mot.com
Service Inventory:
Service Centers must use only new parts.
Call Center Action
When responding to customer inquiries on V3 Razr with complaints related to cracked
flip knuckles, please direct the customers to have their phones serviced as per this FSB.
Service Entry Code
Global M Claims Codes:
Customer Complaint Code: HFL01 (Housing Flip/Blade - Cracked)
Problem Found Code: HFL01 (Housing Flip -Cracked)
Reference Designator Code: H (Housing)
Repair Code: RPM02 (Replace Mechanical Part - Broken/crack)
MOTOROLA INTERNAL USE ONLY Page 5
Wyszukiwarka
Podobne podstrony:
LVCCFSB2005 230 V3 SIM pin brokenLVCCFSB2005 229 V3 RingtonesLVCCFSB2005 6 V3 K Flex DamageLVCCFSB20065 V3i Broken SIM Connector Pin (Rev A)LVCCFSB2006 1 V3 Wet Spot DisplayLVCCFSB20066 V3 P Flex CorrosionLVCCFSB2005(9 V3 CLI ITO Corrosion WinTekLVCCFSB2006D V3 Main LCD Dust IngressLVCCFSB2005(6 V3 Camera insufficient solderLVCCFSB200507 V3 CLI Lens ReplacementLVCCFSB200509 V3 water damage detectLVCCFSB2005)0 V3 CLI FPC Inserting DeflectionDSC PC1550 v3 0 obsfema l233 v3DSC Pc5020 obs v3 03 Metody jakoÂciowe analizy ryzyka [v3]więcej podobnych podstron