{\rtf1\ansi\deff0{\fonttbl{\f0\fnil MS Sans Serif;}}
{\colortbl ;\red255\green0\blue0;\red0\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\lang2057\b\f0\fs24 G04 Dwell in Secs
\par \b0\fs20
\par \pard\cf2 The G04 code is used to enter a set time delay into the program (called a "dwell").
\par
\par A G04 command is written in the following format:
\par G04 X _ _ _ _ ;
\par The dwell value is programmed using the address letter X (time in seconds) followed by a number indicating this dwell value.
\par
\par For example,
\par G04 X1.5 ;
\par This command is read perform a dwell of 1.5 seconds duration.\cf1\b\fs24
\par
\par
\par
\par
\par }