Note: Combination and BSI have stood km with the same programmed

                   Use the following board and bracket
* Build the combined instrument and disassemble it.
* Locate the 8 pin connector chip 93c46.
* Perpendiculars from this chip.
* Connect the clip to Port 0
* Set the bracket on the chip 93C46 (red on pin 1)
* Select the DIGA-Consult Speedometer V2 Citroen C4
* The DIGA-Consult shows you the old Kilometers to.
* Select menu, KM others.
* Enter the new KM-stand.
* Confirm the new KM-stand with OK.

---