In no case prior to the expansion of BSI s disconnecting the battery!
Immobilizer is activated! If the car after the programming does not start the car with the ignition key and unlock again and then with
the ignition is switched on 10 minutes let stand.
Use the following board and bracket
* Build now the BSI module. It is to the left under the cover
in FahrerfuSraum
* Locate the 8 pin connector chip 95160
* Perpendiculars from this chip.
* Connect the clip to Port 4th
* Set the bracket on the chip 95160 (red on pin 1)
* Select the DIGA-Consult Citroen C5 BSI VALEO V1
* The DIGA-Consult shows you the old Kilometers to.
* Select menu, KM others.
* Enter the new KM 0-stand.
* Confirm the new KM-stand with OK.
* Build now BSI first module and then the combined instrument again.
Programming C5 BSI Valeo Manufacturer SI Manufacturer
Perpendiculars from this chip.