73emissions13

Required Maintenance for the Emission Control System

The following maintenance steps must be performed at the specified mileage intervals to keep the emission control system warranty in effect.

A.    At 600 miles

1    — Engine: Change oil

2    — Oil strainer: Clean (Types 1 and 3 only)

3    — V-belt: Check, adjust or replace if necessary

(Type 1)

4    — Oil filter: Replace (Types 2 and 4 only)

5    — Engine: Adjust valves

6    — Engine: Adjust idle

7    — Fuel cap, tank and connections: Check visually.

B.    Every 3,000 miles

8    — Engine: Change oil

9    — Oil strainer: Clean (Types 1 and 3 only)

C.    Every 6,000 miles

10 — V-belt: Check, adjust, or replace if necessary (Type 1)

11    — V-belt for air pump: Check tension and condi-

tion, adjust or replace if necessary (Type 2 only)

12    —Ignition distributor: Check and adjust dwell

angle and timing

13    — Compression: Check

14    —Cooling system: Check air intake housing

bellows and water drain flaps (Types 3 and 4 only)

15    — Engine: Change oil

16    — Oil strainer: Clean (Types 1 and 3 only)

17    — Oil filter: Replace (Types 2 and 4 only)

18    — Engine: Adjust valves

19    — Engine: Adjust idle

20    — Throttle positioner: Check for proper function-

ing (Type 1 where applicable)

13