P5140075

febricate a thermoplastic heat sensitiv_t

• Jold^orthoplast), begin by cutting a piece^M ^,,VaKri.. which is larger Ihan .he arca toE^?

According to the prod^t directions appiy J iate heat source to soften the matenal.    ^ppr»-

pn

1^{to cause pain}

injury to the iliac crest.

further

^0 center of the thermoplastic materiał .. J^tW over the pad which has already beeń pla^ ^d Ihe iliac crest. Ąpply pressure to the therm^ Tstic materiał to form the plastic materiał to the

^tourof tyskim    _

, I _rlosed celi foam pad over the plastic place a ciose //hole" over the raised area materiał, ^Ua^?_n:_ured tissue. The foam should directly over the )    ^ch over the edge of the

_extend a minimum ot

plastic materiał.

Around the edge of the closed celi foam and the plastic materiał place a 2" strip of tapc. This is to limit the separation of the foam from the plastic materiał.

Apply several strips of tape over the fabricated thermoplastic pad making surę to have enough adhesion to the surrounding skin. The additional tape is required to minimize pad migration during activity and/or contact.

Strips of Kinesio Tex or another elastic tape may be used. Examples of other tape may be elastoplast or elastikon.

Completed combination taping using Kinesio hip pointer/iliac crest contusion taping and external protection.

105