Audi SG 2,2 1994-96 Engine codę: AAN
Impoitant notę
Replacement lnteival Guide
Check For Engine Damage
Repair Times - lus
Speciai Tools
Special Precautions
Removal
Installation
Installation
1. Ensure timing marks aligned [3] & [4],
2. Fit timing belt to crankshaft sprocket. Fit assembly to crankshaft [8].
3. Fit crankshaft bolt [2], Tighten fingertight.
4. Fit timing belt lower cover [5]. Tighten bolts to 10 Nm.
5. Fit timing belt to remaining sprockets. Ensure belt is taut between sprockets on non-tensioned side.
6. Ensure timing marks aligned [3] & [4].
7. Tum tensioner clockwise using hexagon [9] until belt can just be twisted with finger and thumb through 900 at^[10].
8. Tighten tensioner bolts to 29 Nm [6].
9. Tum crankshaft two turns clockwise. Ensure timing marks aligned [3] & [4],
10. Recheck belt tension [10].
11. If tension not as specified: Slacken tensioner bolts [6]. Adjust position of tensioner. Tighten bolts to 29 Nm.
12. Install components in reverse order of removal.
13. Lock crankshaft pulley/damper. Use tool No.3256. Tighten crankshaft bolt [2]. Tightening torque: 150 Nm + 180° Use tool No.2079 and torque wrench.
NOTĘ: Thistorgue figurę only appiies when using tool No.2079.
IAD11167I
Altom