17-10 REAR SUSPENSION
• Vise the rear shock absorber unit in inverted position.
• Depress the bump rubber fully to protect the damper rod.
Evenly hammer the stopper © with a screwdriver or equiva-lent and remove it from the rear shock absorber body.
Depress the seal case (D with a screwdriver until the is fully exposed. r
• Remove the circlip ®.
NOTĘ:
Do not scratch the inner surface of the shock absorber body to avoid oil leaks.
• Extract the damper rod assembly from the shock absorber body.
• Inspect the oil seal and O-rings.
• Inspect the damper rod for bends and scratches.
• Inspect the inner surface of the body.
• Inspect the “teflon coating metal” on the piston.
• Replace O-rings with new ones.
• Replace the “teflon coating metal” by cutting off the old one and putting a new one onto the piston if necessary.