suzuki rm250
00

FUEL SYSTEM 9-13

CARBURETOR SOLENOID

REMOVAL AND INSPECTION

•    Remove the solenoid.

•    Connect the coupler ®.

•    Connect tachometer sensor pług (D to the Multi Circuit tester.

|S) 09900-25008: Multi Circuit tester set Tester knob indication: RPM A

•    Pinch the high tension cord with the tachometer sensor d).

•    Reassemble the fuel tank and seat.

•    Shift the transmission in neutral.

•    Start the engine.

•    Inspect the valve operation by following engine RPM.

ON position: 2 000 - 3 000, 9 300 - 10 500 rpm OFF position: Others

If the valve operation is not correct, inspect the solenoid valvę by following procedurę.

•    Connect 12 V battery and solenoid as sho

•    Check the valve movement when t closed.

•    If the solenoid valve movement is not correct, replace the solenoid valve with new one.

•    If the solenoid valve move correctly, inspect following parts: CDI unit (CZT17-4)

Statorcoil (CJ^M-5)

Open Circuit in wiring harness Coupler connection

REASSEMBLY

Reassemble the solenoid valve in the reverse order of removal. Pay attention to the following point:

•    Apply engine oil to the cross thread of the solenoid and the new O-ring.

CAUTION

Replace the O-ring with a new one.

r	X
As M	\
i ^ ii	^ u
^1—inni-