Suzuki RM2500

FUEL SYSTEM 9-13

FUEL SYSTEM 9-13

CARBURETOR SOLENOID

REMOVAL AND INSPECTION

♦    Remove the solenoid.

♦    ConnectthecouplerCi).

♦    Connect tachometer sensor pług ® to the Multi Circuit tester.

09900-25008: Multi Circuit tester set Tester knob indication: RPM A

♦ Pinch the high tension cord with the tachometer sensor ®.

•    If the solenoid valve movement is not correct, replace the solenoid valve with new one.

•    If the solenoid valve move correctly, inspect following parts; CDI unit (£7*17-4)

Stator coil (C^T 17-5)

Open Circuit in wiring harness Coupler connection

REASSEMBLY

Reassemble the solenoid valve in the reverse order of removal. Pay attention to the following point:

•    Apply engine oil to the cross thread of the solenoid and the new O-ring.

CAUTION

Replace the O-ring with a new one.