suzuki rm25029
13-4 FRONT AND REAR WHEELS
REAR WHEEL REASSEMBLY
• Reassemble the rear wheel and axle shaft.
• Adjust the drive Chain slack. (d/=2-16)
• Tighten the axle nut to the specified torque.
H Rear axle nut: 110 N m (11.0 kgf-m, 79.5 Ib-ft)
Left
n
FWD
t
Right
n
Chain adjuster washer
FRONT AND REAR WHEEL INSPECTION
SPACER AND DUST SEAL INSPECTION
• Inspect the right and left wheel spacers and the dust seals for wear and cracks.
• Replace the spacer together with the dust seal, if you find excessive wear on the spacer.
NOTĘ:
Apply grease on the spacer and dust seal before reasse;
AXLE SHAFT INSPECTION
Support the axle shaft with V-blocks an runout.
IB Wheel axle runout
Service limit: 0.25 mm {0,01 in)
O 09900-20607: Dial gauge (1/100 mm) 09900-20701: Mag net ic stand 09900-21304: V-block set (100 mm)
WHEEL RIM INSPECTION
Measure the wheel rim runout with a dial gauge.
IB Wheel rim runout
Service limit: 2.0 mm (0.08 in)... axial and radial
Wyszukiwarka
Podobne podstrony:
suzuki rm25031 13-6 FRONT AND REAR WHEELS 13-6 FRONT AND REAR WHEELSFRONT WHEEL BEARING REASSEMBLY
20496 Suzuki RM2509 13-4 FRONT AND REAR WHEELSREAR WHEEL REASSEMBLY • Reassemble
25291 Suzuki RM2501 13-6 FRONT AND REAR WHEELSFRONT WHEEL BEARING REASSEMBLY ♦ Ap
Suzuki RM2508 14-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake di
suzuki rm25036 14-4 FRONT AND REAR BRAKES • Remove the reservoir cap. • &nb
suzuki rm25038 14-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake d
suzuki rm25040 14-8 FRONT AND REAR BRAKESREAR CALIPER REMOVAL AND DISASSEM-BLY •
87472 Suzuki RM2504 14-2 FRONT AND REAR BRAKESCONSTRUCTION H 10 N-m (1.0 kgf-mt 7.0 Ib-ft) H 23 N-m
33596 Suzuki RM2500 14-8 FRONT AND REAR BRAKES 14-8 FRONT AND REAR BRAKES #REAR CALIPER REMOVAL AND
Suzuki RM1250 14-6 FRONT AND REAR WHEELSREARWHEEL REMOVAL • Place the motorcycle
więcej podobnych podstron